NJ Saltwater Fisherman Forums

Boating => Boating General Discussions => Topic started by: Wreckfish on January 09, 2008, 02:17:59 PM

Title: Trim Tabs Installation
Post by: Wreckfish on January 09, 2008, 02:17:59 PM
Anyone every install their own trim tabs. Is it super complicated/difficult.
Title: Re: Trim Tabs Installation
Post by: mboy on January 09, 2008, 04:12:13 PM
AH, I am about to do it (well, my buddy from work and maybe Duffman will help too) in the spring.

Bennet M120 Sport Tabs.

Going to mount the Hydraulic unit in my center console (Bennet sent me extra long lines).

People who I ahev spoken to says it is not bad at all if any mechanical ability (which I do not posses).

Duffman did his as we spoke on it a few weeks ago, so I am sure he can chime in.


Every boat needs them as far as I am concerned.

What boat and tabs are you thinking of going with?


Benet has a video on their site (as well as the instructiopns on how to install).


I was going to pay my marina, but they want 5-6 hours @ $110/hr to do it and Benet told me I should be able to do them with a friend in 3-3.5 hours, so that is what I am going to do.

Yes, Duff, plenty of beer (Miller lite I believe my boy drinks-bottles), so will get us a case or 2 for the install and take home :)
Title: Re: Trim Tabs Installation
Post by: Luna Sea 5 on January 09, 2008, 05:09:33 PM
Mike, if you need an extra hand at the time, let me know.. I would like to see how its done also..
Title: Re: Trim Tabs Installation
Post by: mboy on January 09, 2008, 06:09:55 PM
You are invited.

I am looking to bang out everything in the same weekend (compund/wax), install tabs, etc :)
Title: Re: Trim Tabs Installation
Post by: Duffman on January 09, 2008, 08:30:48 PM
  Very straight forward install. It will take you time to complete, but nothing is over the top difficult.
  Only issue I had to deal with was cutting the square hole for the rocker switches. I had to deal with 3/4" glassed over ply that made it a little tough to cut the hole -nothing a dremel couldnt handle.
  The tabs should come with an install video. Watch it a few times and plan out the install at home. Once you get started it'll be done in a half day. 
  Mike - have beer -will travel    chrz
Title: Re: Trim Tabs Installation
Post by: mboy on January 09, 2008, 08:34:59 PM
Beer we will have.

Looks like it will be you, me, my boy from work, Ed (have every tool in the book and then some) Young Gull and Luna Sea that day to get'er done (with a few other minor things).

Guess I will need 3 cases of Miller light bottles :)

Shooting for 2nd-3rd weekend April weather permitting.
Title: Re: Trim Tabs Installation
Post by: Wreckfish on January 09, 2008, 10:04:00 PM
Thanks. I going with the Bennent M120 Sport tabs also. Sounds like beer and friends are an essential part of the process. Going attempt mine in late Feb or Early March. 
Title: Re: Trim Tabs Installation
Post by: mboy on January 09, 2008, 10:10:57 PM
LMK when ready to purchase them. Cheapest price I found delivered was about $425.