NJ Saltwater Fisherman Forums

General Forum => Product Reviews => Topic started by: Pops Soul on April 03, 2011, 12:09:50 PM

Title: Loctite Marine Epoxy
Post by: Pops Soul on April 03, 2011, 12:09:50 PM

I was walking through Home Depot in the glue and Caulk section when I seen this Loctite
(A Trusted Name) Marine Expoxy. I picked it up knowing I would have some screw holes to fill after installing the new GPS/FF combo. I figured what the hell instead of messing with the mixing of gelcoat. Have to tell you guys nice stuff dries to a gloss white, No guessing on mixing since this is a twin tube dispenser. ALso I went to reuse it after a couple weeks figureing I would have to dig out the old dried up stuff NO ISSUES pushed the plunger came out like day one. Very Nice for small jobs on the boat dries hard as nails. t^

Title: Re: Loctite Marine Epoxy
Post by: SurfJockey on April 03, 2011, 01:03:01 PM

 t^

Will this bond with wood Skip?

Title: Re: Loctite Marine Epoxy
Post by: Hunter 2 on April 03, 2011, 02:50:23 PM

Thanks Skip,  I can use a product like this on some old screw holes that need filling. TT^

Title: Re: Loctite Marine Epoxy
Post by: Pops Soul on April 03, 2011, 02:56:23 PM

Jason I checked the package does not say anything about wood, wether it will or wouldn't.
Says Fiberglass, Aluminum, Glass, PVC, Brass, Galvanized Pipe, and Most Plastics! SO far I only used it on fiberglass.  TT^