NJ Saltwater Fisherman Forums

Boating => Boating General Discussions => Topic started by: mboy on July 27, 2007, 08:17:48 PM

Title: Best replacement primer bulb?
Post by: mboy on July 27, 2007, 08:17:48 PM

Iam going to take Hotrods advice and start on my sputtering out issue by replacing my primer bulb (hope this will fix the valve issue he mentioned).
Which is the best brand of bulb to replace with?

Johnson 2003 175hp loop charged v6 2 stroke ;)

Title: Re: Best replacement primer bulb?
Post by: Hotrod on July 27, 2007, 08:49:23 PM

Would just head to the johnson dealer.

But before doing that.  I would check the bulb before each start for awhile.  when and if you find it soft.  see if you get the sputter.  although I don't think you'll be paying that much for a new bulb..

Title: Re: Best replacement primer bulb?
Post by: salty pig on July 28, 2007, 12:05:09 AM

jonson dealer on rt 35 seaboard  i think i get my parts from him. thinking of doing the same thing cant get my bulb to stay hard not sure if its age or line suckin air somewhere else (NO PUN). most the lines i took those crappy plastic clamps off just replaced one on oil today it was leaking also.