NJ Saltwater Fisherman Forums
Boating => Boating General Discussions => Topic started by: wimpy on November 29, 2008, 10:25:25 AM
-
Have offer for free Cuda 168, any info good or bad on unit. Will use on x-tra skiff.
-
Not familiar with one first hand, but if it's for free, use it and rate it yourself. The least you can do is not like it.
Like the old saying goes...'if it's free, it's for me. TT^
-
Free, worth the try. But remember, you get what you pay for. <'((((><
-
New as in sealed box- really looking for any kind of tweeking to do on using or install- maybe looking at portable assc package.
-
New as in sealed box- really looking for any kind of tweeking to do on using or install- maybe looking at portable assc package.
Portable assc package?
When I had a 12 ft car topper aluminum boat I mounted a transducer onto a 1x3 board. Put a squeeze clamp on the other end. Had it cut long enough for the transducer to be in the water when the board was clamped to the transom. When I put the boat in the water, I clamped the board onto the transmon, unclamped the board when I was done. Wrap the wire up and your good to go.
The head unit was mounted on a Johnny Ray mount the was removable. The head unit came off and the bottom mount of the Johnny Ray stayed on the boat. Unclip from battery and good to go.
No muss, no fuss. TT^
-
Not familiar with one first hand, but if it's for free, use it and rate it yourself. The least you can do is not like it.
Like the old saying goes...'if it's free, it's for me. TT^
whs
-
Joe I think you and I went to the same school. I did the same thing on my jon boat and it worked great.
But you forgot to finish the saying...If its free its for me, I'll take 2, what is it?
-
TT^