« previous next »
Pages: [1]   Go Down

Author Topic: Power washing  (Read 2774 times)

Offline sperzonkers2

  • Full Member
  • **
  • Posts: 191
  • Karma: +0/-0
Power washing
« on: March 26, 2009, 02:15:40 PM »
Hey all, I have heard that it is not good to wash your boat with a power washer as it can damage the gel coat. Any one know if this is correct?

Thanks
Logged
Bill

Offline ped579

  • NJSF Field Reporter
  • Super Hero Member
  • *****
  • Posts: 11408
  • Karma: +1/-0
  • Happiness is long casts, tight lines & bent rods
Re: Power washing
« Reply #1 on: March 26, 2009, 02:30:23 PM »
That is correct.  But if you use it correctly and not get to close with the nozzle you should be just fine.  The closer you get with the nozzle the stronger the stream, enough so, it can cut into almost anything.
Logged
IN GOD WE TRUST

"Hypocrisy is not a fault these days - it is a lifestyle"

NJBBA: 4567

Ham Call; N2HYG Monitor RPT.  146.835

Offline sperzonkers2

  • Full Member
  • **
  • Posts: 191
  • Karma: +0/-0
Re: Power washing
« Reply #2 on: March 26, 2009, 02:47:29 PM »
 t^Thanks Paul
Logged
Bill

Offline CapBob

  • Super Hero Member
  • *****
  • Posts: 3818
  • Karma: +0/-0
Re: Power washing
« Reply #3 on: March 26, 2009, 05:09:20 PM »
Quote from: ped579 on March 26, 2009, 02:30:23 PM
That is correct.  But if you use it correctly and not get to close with the nozzle you should be just fine.  The closer you get with the nozzle the stronger the stream, enough so, it can cut into almost anything.

 whs

Do it as I do, as soon as you pull out power wash it down and you should have no problem, everything comes right off. Let it dry on and its is a lot harder t^
Logged

Offline Luna Sea 5

  • Admin
  • Super Hero Member
  • *****
  • Posts: 12104
  • Karma: +0/-0
  • Nick (Luna Sea 5)
    • My Facebook Profile
Re: Power washing
« Reply #4 on: March 26, 2009, 08:05:21 PM »
i use a wide spray, don't know what I would do without a power washer.
Logged
Fish out of Toms River NJ.
Call Nick for open boat, 973-417-5756, or on Channel 68.

Team Luna Sea 6

Offline PeggyLee

  • Super Hero Member
  • *****
  • Posts: 3970
  • Karma: +0/-0
Re: Power washing
« Reply #5 on: March 26, 2009, 08:35:50 PM »
Funny that you ask. Just yesterday I was using the power washer on some stuff outside,the machine was not running smooth no matter how I ajusted the choke... checked everything ...make a long story short ..returned the machine to SAM's with the original receipt and paper work after 6 months. Sam's C/S was great and I was able to exchange for a new one.Sam's got my vote.
I use the wide spray nozzle on a wet hull and do not get too close.  Good Luck with yours.   t^
Logged

Offline sperzonkers2

  • Full Member
  • **
  • Posts: 191
  • Karma: +0/-0
Re: Power washing
« Reply #6 on: March 27, 2009, 10:53:26 AM »
 t^Thanks, all. That's a good tip Capt Bob I will try that.
Logged
Bill
Pages: [1]   Go Up
« previous next »
 

NJSFlogofinal1

BSX

terrafin

Heavy Duty truck Parts On Line

Web Site Design

JSBSE_430x80.png

Know Before You Go

Local Weather | Marine Bouy Weather | Inshore Forecast | Offshore Forecast | Interactive Wind Charts | Tide Charts | Sea Surface Temps | Chlorophyll Concentrates | Online Chart Viewer

-

new jersey marine weather forecastterrafin

-