Author Topic: need lower unit help  (Read 3791 times)

Offline Andys Delight

  • Super Hero Member
  • *****
  • Posts: 1847
  • Karma: +0/-0
need lower unit help
« on: March 17, 2012, 02:57:42 PM »
OK, I changed out water pump, engine started right up and peeing well.  I put it in forward and reverse and the prop is only really spinning in forward gear and not as much as it should, reverse it still spins forward.  When engine is off and I put it in forward or reverse the prop spins freely.  2002 HPDI 200HP.  What did I do wrong?  I had it in neutral when I removed and replaced the lower unit.  Came off and went on without issue.
The cure for everything is salt water: sweat, tears, and the sea.


Offline Andys Delight

  • Super Hero Member
  • *****
  • Posts: 1847
  • Karma: +0/-0
Re: need lower unit help
« Reply #1 on: March 17, 2012, 04:37:26 PM »
Never mind, I'm a dummy.  Problem solved.
The cure for everything is salt water: sweat, tears, and the sea.


Offline IKAT

  • Super Hero Member
  • *****
  • Posts: 1411
  • Karma: +0/-0
Re: need lower unit help
« Reply #2 on: March 17, 2012, 04:39:34 PM »
 clp  FORGET PM THEN --DUMMY   grtn
« Last Edit: March 17, 2012, 04:43:37 PM by IKAT »

Offline Bottom Dweller

  • Sr. Member
  • ***
  • Posts: 439
  • Karma: +0/-0
  • FISH HARD OR GET OUT OF THE BOAT
Re: need lower unit help
« Reply #3 on: March 17, 2012, 04:54:32 PM »
Righty tighty!  clp
You can't catch'em from the couch. Can ya?

Skipper of the Slowski


Offline Andys Delight

  • Super Hero Member
  • *****
  • Posts: 1847
  • Karma: +0/-0
Re: need lower unit help
« Reply #4 on: March 17, 2012, 05:53:03 PM »
The shift shaft didn't go into the sleeve, took it of and put it on right, problem solved.
The cure for everything is salt water: sweat, tears, and the sea.

Offline IrishAyes

  • Fishing At It's Finest
  • Admin
  • Super Hero Member
  • *****
  • Posts: 17408
  • Karma: +0/-0
Re: need lower unit help
« Reply #5 on: March 17, 2012, 07:09:25 PM »
Don't feel bad about doing that.
I had mine done at a marina a few years ago and the mechanic did the same thing. But they had put everything back together and slashed my boat. Obviously, they had to pull the boat again, realign the shaft then put the boat back in. Just shows, it happens to the pros also.  TT^
Captain Joe of the Irish Ayes

May the holes in your net be no larger than the fish in it.  ~Irish Blessing

Offline Pops Soul

  • SKIP <*}}}><
  • Super Hero Member
  • *****
  • Posts: 5384
  • Karma: +0/-0
  • SKIP <*}}}><
Re: need lower unit help
« Reply #6 on: March 17, 2012, 07:59:16 PM »
I was going to ask if you connected it  ;D
It's Not A Knot Until You Pull It Tight!


Offline BigAl13

  • Super Hero Member
  • *****
  • Posts: 6026
  • Karma: +0/-0
  • Fish out of Keyport
Re: need lower unit help
« Reply #7 on: March 17, 2012, 08:43:45 PM »
Don't feel bad about doing that.
I had mine done at a marina a few years ago and the mechanic did the same thing. But they had put everything back together and slashed my boat. Obviously, they had to pull the boat again, realign the shaft then put the boat back in. Just shows, it happens to the pros also.  TT^

Slashed :headscra: Splashed maybe??
Its better to sit in a boat and think about God, than to sit in a church and think about fishing.

Offline IrishAyes

  • Fishing At It's Finest
  • Admin
  • Super Hero Member
  • *****
  • Posts: 17408
  • Karma: +0/-0
Re: need lower unit help
« Reply #8 on: March 17, 2012, 09:15:34 PM »
Quote
Slashed Splashed maybe??

Yup splashed. Duh.  ;D
Captain Joe of the Irish Ayes

May the holes in your net be no larger than the fish in it.  ~Irish Blessing


Offline Maritime Matt

  • Sponsor
  • Hero Member
  • *****
  • Posts: 688
  • Karma: +0/-0
  • Maritime Skiff 20' Pioneer Pilothouse USCG Lic
    • TASKMARINE.COM
Re: need lower unit help
« Reply #9 on: March 17, 2012, 09:51:19 PM »
Happens to the best of us  ;D even me.

  WWW.TASKMARINE.COM     Marine SERVICE, Parts & More

Offline Andys Delight

  • Super Hero Member
  • *****
  • Posts: 1847
  • Karma: +0/-0
Re: need lower unit help
« Reply #10 on: March 17, 2012, 10:28:57 PM »
You guys make me feel better.  It's funny, I remember a couple years ago pops soul answered one of my questions with a solid "you're gonna have to learn this stuff" post.  Today I feel like I do kinda know it and I have to say I'm pretty proud to be honest.  This site has been so awesome, I've made good friends and learned so much about boats, fishing, and life.  I really can't thank you all enough.
The cure for everything is salt water: sweat, tears, and the sea.

Offline IKAT

  • Super Hero Member
  • *****
  • Posts: 1411
  • Karma: +0/-0
Re: need lower unit help
« Reply #11 on: March 18, 2012, 12:34:16 PM »
 t^  Don't worry about it  t^
Did the same thing with my 1958 Johnson the first time  fcp

Guess there is a saying for " Johnson Rods "

Glad you didn't dump it first--I DID  ;D

Offline Fishin Dude

  • Super Hero Member
  • *****
  • Posts: 4526
  • Karma: +0/-0
  • FISH CONTROL MY BRAIN
Re: need lower unit help
« Reply #12 on: March 18, 2012, 02:09:51 PM »
We all learn by our mistakes , as well as those of others. Keep turning wrenches, never get discouraged. I still laugh at myself sometimes about things I have done years ago. 
I've spent most of my life fishing, the rest I've just wasted     <'((((><

Offline IrishAyes

  • Fishing At It's Finest
  • Admin
  • Super Hero Member
  • *****
  • Posts: 17408
  • Karma: +0/-0
Re: need lower unit help
« Reply #13 on: March 18, 2012, 02:14:41 PM »
We all learn by our mistakes , as well as those of others. Keep turning wrenches, never get discouraged. I still laugh at myself sometimes about things I have done years ago. 

As the saying goes Darren: If you can't laugh at yourself...laugh at someone else.  TT^  hhppy
Captain Joe of the Irish Ayes

May the holes in your net be no larger than the fish in it.  ~Irish Blessing

Offline Pops Soul

  • SKIP <*}}}><
  • Super Hero Member
  • *****
  • Posts: 5384
  • Karma: +0/-0
  • SKIP <*}}}><
Re: need lower unit help
« Reply #14 on: March 20, 2012, 07:46:19 PM »
You've come along way. Some people are afraid to just try........ chrz
It's Not A Knot Until You Pull It Tight!


 

NJSFlogofinal1

BSX

terrafin

Heavy Duty truck Parts On Line

Web Site Design

Know Before You Go

Local Weather | Marine Bouy Weather | Inshore Forecast | Offshore Forecast | Interactive Wind Charts | Tide Charts | Sea Surface Temps | Chlorophyll Concentrates | Online Chart Viewer

-

new jersey marine weather forecastterrafin

-