« previous next »
Pages: [1]   Go Down

Author Topic: Cutting steel siding  (Read 6392 times)

Offline Reckless

  • AKA Frankeu
  • Super Hero Member
  • *****
  • Posts: 2734
  • Karma: +0/-0
Cutting steel siding
« on: July 12, 2012, 04:00:57 PM »
 I am replacing a window with french doors. I want to cut the siding without removing it from the house. Any suggestions on how to do this would be appreciated.  slt
Logged

Offline wb

  • Super Hero Member
  • *****
  • Posts: 5274
  • Karma: +0/-0
Re: Cutting steel siding
« Reply #1 on: July 12, 2012, 04:05:17 PM »
use one of those handheld mini circular saws, like a 3" dia blade. Easy to maneuver and fairly quick. Go for the carbide tip blade if cutting steel ( are you sure it's not aluminum? ). Some of those cordless with the LI-Ions packs are like 24VDC and pack quite a punch (for cordless.)
Logged

Online Hotrod

  • Administrator
  • Super Hero Member
  • *****
  • Posts: 20999
  • Karma: +0/-0
  • The Phyllis Ann
    • NJ Outdoords Media
Re: Cutting steel siding
« Reply #2 on: July 12, 2012, 04:18:58 PM »
Grinder t^
Logged


Offline BigAl13

  • Super Hero Member
  • *****
  • Posts: 6026
  • Karma: +0/-0
  • Fish out of Keyport
Re: Cutting steel siding
« Reply #3 on: July 12, 2012, 04:40:28 PM »
 whs  grinder with a diamond wheel wear glasses and long sleeves good luck t^
Logged
Its better to sit in a boat and think about God, than to sit in a church and think about fishing.

Offline Reckless

  • AKA Frankeu
  • Super Hero Member
  • *****
  • Posts: 2734
  • Karma: +0/-0
Re: Cutting steel siding
« Reply #4 on: July 12, 2012, 04:55:06 PM »
Positive it is steel. Thanks! Save a lot of time cutting it right on the house without removing it.
Logged

Offline BigAl13

  • Super Hero Member
  • *****
  • Posts: 6026
  • Karma: +0/-0
  • Fish out of Keyport
Re: Cutting steel siding
« Reply #5 on: July 12, 2012, 04:57:52 PM »
Quote from: Reckless on July 12, 2012, 04:55:06 PM
Positive it is steel. Thanks! Save a lot of time cutting it right on the house without removing it.


Its probly tin Ive never seen steel but none the less use a grinder. Does the door have a nail flange or brick mold ??
Logged
Its better to sit in a boat and think about God, than to sit in a church and think about fishing.

Offline Bottom Dweller

  • Sr. Member
  • ***
  • Posts: 439
  • Karma: +0/-0
  • FISH HARD OR GET OUT OF THE BOAT
Re: Cutting steel siding
« Reply #6 on: July 12, 2012, 05:12:56 PM »
Steel siding on a house :headscra:
Logged
You can't catch'em from the couch. Can ya?

Skipper of the Slowski

Offline Reckless

  • AKA Frankeu
  • Super Hero Member
  • *****
  • Posts: 2734
  • Karma: +0/-0
Re: Cutting steel siding
« Reply #7 on: July 12, 2012, 05:15:14 PM »
Probably tin. Brick molding on the door.

http://www.hartmanexteriors.com/steel-siding/
« Last Edit: July 12, 2012, 05:18:06 PM by Reckless »
Logged

Offline BigAl13

  • Super Hero Member
  • *****
  • Posts: 6026
  • Karma: +0/-0
  • Fish out of Keyport
Re: Cutting steel siding
« Reply #8 on: July 12, 2012, 05:17:55 PM »
cut the siding 1/2 in bigger than the size of the door from brick mold to brick mold then before you put the door in slide j-channel in the siding. after you get the door in use a p shooter to get trim nails in the flat part of the j into the brick mold.
Logged
Its better to sit in a boat and think about God, than to sit in a church and think about fishing.

Offline Reckless

  • AKA Frankeu
  • Super Hero Member
  • *****
  • Posts: 2734
  • Karma: +0/-0
Re: Cutting steel siding
« Reply #9 on: July 12, 2012, 05:21:03 PM »
The exterior around the door will be inside a sunroom will not be replacing the siding around the door. Have to cut the siding to the outside of the sunroom. I will use the J channel there though. Thanks for the help!!
Logged

Offline Hunter 2

  • RFA-NJ Member
  • Super Hero Member
  • *****
  • Posts: 12156
  • Karma: +0/-0
  • 36' Topaz Express "Hallie Loren"
Re: Cutting steel siding
« Reply #10 on: July 12, 2012, 09:20:48 PM »
Nice networking guys t^
Logged
Eddie "Hunter 2"
36' Topaz "Hallie Loren"    Charter boat sailing from Wagners Marina, Keyport NJ


 Life is short, Fish Hard.

Offline overbite

  • Super Hero Member
  • *****
  • Posts: 1143
  • Karma: +0/-0
Re: Cutting steel siding
« Reply #11 on: July 12, 2012, 09:26:01 PM »
Photos with questions save time and help.  chrz
Logged

Offline BigAl13

  • Super Hero Member
  • *****
  • Posts: 6026
  • Karma: +0/-0
  • Fish out of Keyport
Re: Cutting steel siding
« Reply #12 on: July 13, 2012, 05:31:50 AM »
Good luck take pics of the project and if you need any other help pm me t^
Logged
Its better to sit in a boat and think about God, than to sit in a church and think about fishing.

Offline Reckless

  • AKA Frankeu
  • Super Hero Member
  • *****
  • Posts: 2734
  • Karma: +0/-0
Re: Cutting steel siding
« Reply #13 on: July 13, 2012, 02:07:01 PM »
Thanks everyone for your assistance. Will post pictures if I ever get done. slt slt
Logged

Offline captainbailey

  • Hero Member
  • ****
  • Posts: 636
  • Karma: +0/-0
Re: Cutting steel siding
« Reply #14 on: July 13, 2012, 03:21:40 PM »
Logged
Z

Offline Mbailey33

  • Sr. Member
  • ***
  • Posts: 447
  • Karma: +0/-0
Re: Cutting steel siding
« Reply #15 on: July 13, 2012, 03:37:34 PM »
Quote from: Bottom Dweller on July 12, 2012, 05:12:56 PM
Steel siding on a house :headscra:

Very common over here in PA

(im a Property Insurance Adjuster,and see it quite frequently )

Grinder is the way to go to cut it, just have some water handy, never know what combustibles might be behind that siding.

Logged
Never put off until tomorrow, what you can do the day after tomorrow

Offline overbite

  • Super Hero Member
  • *****
  • Posts: 1143
  • Karma: +0/-0
Re: Cutting steel siding
« Reply #16 on: July 15, 2012, 11:25:54 AM »
 slt On the subject of Steel Siding  :-* Yes there is and can be checked out at United States Seamless a major supplier. And it can also be checked out at ABOUT.COM Where and if its approved for our area and state  5hrug And if you have any misgivings Talk to a fire marshal for his opinion  fcp But that is only my opinion  smk Bill   
Logged
Pages: [1]   Go Up
« previous next »
 

NJSFlogofinal1

BSX

terrafin

Heavy Duty truck Parts On Line

Web Site Design

JSBSE_430x80.png

Know Before You Go

Local Weather | Marine Bouy Weather | Inshore Forecast | Offshore Forecast | Interactive Wind Charts | Tide Charts | Sea Surface Temps | Chlorophyll Concentrates | Online Chart Viewer

-

new jersey marine weather forecastterrafin

-