Author Topic: Rod selection advice  (Read 4036 times)

Offline ChrisL

  • Super Hero Member
  • *****
  • Posts: 2790
  • Karma: +0/-0
    • Oak Lane Woodworks
Rod selection advice
« on: May 15, 2013, 01:30:26 PM »
I'd like to get out on a boat on a little more regular basis this year.  Either member's open boat offers, charter open boats or party boats.
Rather than using someone's gear or doing a rental on a party boat, I'd like to have my own gear to bring.
Something versatile and affordable is key.  If possible something that would work for both bass/blues and fluking. Or should I really just look for 2 different rods.  I'm more comfortable and familiar with spinning gear.   
I was looking at the Ugly Stick Bigwater rods in 6.5-7ft either 1/2-3oz or 1-6oz.  But I'm open to other suggestions.
I seem to remember whatever Rod had on the boat last fall being decent and seemed affordable, what was that?   


Offline Takes Prizoners

  • Super Hero Member
  • *****
  • Posts: 1166
  • Karma: +0/-0
Re: Rod selection advice
« Reply #1 on: May 15, 2013, 02:31:21 PM »
my tsunami jigging rod hasn't failed me yet. tstbs-j661mh, got it for a steal at $50 a couple years ago from Dicks.  I use it for everything from chunking to the surf


Offline Treebeard

  • Super Hero Member
  • *****
  • Posts: 2040
  • Karma: +0/-0
Re: Rod selection advice
« Reply #2 on: May 15, 2013, 03:29:28 PM »
X2 on the Tsunami's as a nice rod for the $$ .. I got my bro one for fluking off our boat a few years back..if you where going to consider 2 rods, maybe a lighter spin model also, like the TRSR70M for tossing lighter bucktails to Fluke, etc.. Also, for a heavier, all around party boat style, over the rail into the pail rod, hard to beat a good old ugly stick.. They're very versatile and those glass blanks take a real beating.   t^  chrz

Offline Bucktail

  • Just a Jig-alo
  • Admin
  • Super Hero Member
  • *****
  • Posts: 12628
  • Karma: +0/-0
  • Have jigs. Will travel.
    • NJ Saltwater Fishing Tackle
Re: Rod selection advice
« Reply #3 on: May 15, 2013, 04:07:09 PM »
Chris,

I would agree with the jigging rod selection.  Many of the lower priced jiggers are very versatile and can be used for chunking and dragging bait, as well as jigging.

For a budget, all around rod, the Ugly Stik Tiger Lite in heavy action would be my choice.  You can bounce bucktails, drag fluke rigs, snag bunker and liveline them and (of course) jig with it.

If you want to go with a spinner, I would suggest a Baitrunner.  This will give you the ability to liveline bunker or spot, or drift baits back into a chum slick easier than you could with just a regular spinner.


Offline bassnblues

  • Super Hero Member
  • *****
  • Posts: 1492
  • Karma: +0/-0
Re: Rod selection advice
« Reply #4 on: May 15, 2013, 04:20:05 PM »
I have an older Tsunami that's become one of my favorite rods. Don't recall the model # but it's a 7' conventional for 12-25 lb line. It was something like 30.00 when I got it. I have it paired with a Abu 6500. I've used it for striper clamming/chunking and used to bring it on PB's for fluke.

You may want to take a look at the Star Stellar Lite series. Nice rods at decent prices.

Offline ChrisL

  • Super Hero Member
  • *****
  • Posts: 2790
  • Karma: +0/-0
    • Oak Lane Woodworks
Re: Rod selection advice
« Reply #5 on: May 16, 2013, 12:53:16 PM »
I'll check out the Tsunami and Ugly Stick Tiger rods  t^
For now I plan to use one of my existing Penn or Shimano spinners with whatever rod I get.
If I add a dedicated fluke rod, I'd like to use an old Penn peerless 9 that I'm rebuilding.

Offline Wreckfish

  • Super Hero Member
  • *****
  • Posts: 1138
  • Karma: +0/-0
Re: Rod selection advice
« Reply #6 on: May 16, 2013, 02:35:39 PM »
Chris,
Check you the St Croix Tidewaters. They come in both spinning and casting. I had a TIC70MHF (Casting). I make my own rods but the Tidemasters are still one of my all time favorite rods.


Offline Reel Time

  • Moderator
  • Super Hero Member
  • *****
  • Posts: 1497
  • Karma: +0/-0
Re: Rod selection advice
« Reply #7 on: May 16, 2013, 04:37:08 PM »
 I'm another one in favor of a tsunami rod, been using them for years and love them.

 Got SeaChelle, and my step pop both casting tsunami jigging rods, and they have been great for everything we've tried so far.



 If you by chance where casting my baitrunner set up last time we where on Rod's boat, that was a tsunami also.
« Last Edit: May 16, 2013, 04:38:44 PM by Reel Time »
All your tuna's are belong to me

Offline FishOn

  • Hero Member
  • ****
  • Posts: 586
  • Karma: +0/-0
Re: Rod selection advice
« Reply #8 on: May 16, 2013, 05:13:43 PM »
Chris,
Check you the St Croix Tidewaters. They come in both spinning and casting. I had a TIC70MHF (Casting). I make my own rods but the Tidemasters are still one of my all time favorite rods.

I love my 8ft med/light for back water fishing and fluking from the beach

You might also want to look into the Star Nicklelight series.
« Last Edit: May 16, 2013, 05:14:33 PM by FishOn »
Who are you to judge the life I live? I'm not perfect and I don't have to be! Before you start pointing fingers, make sure your hands are clean. - Bob Marley


Offline Scott Bailey

  • Sr. Member
  • ***
  • Posts: 435
  • Karma: +0/-0
  • seabass sharks cod ling stripers i love fishing
Re: Rod selection advice
« Reply #9 on: July 05, 2013, 02:17:47 AM »
I'd like to get out on a boat on a little more regular basis this year.  Either member's open boat offers, charter open boats or party boats.
Rather than using someone's gear or doing a rental on a party boat, I'd like to have my own gear to bring.
Something versatile and affordable is key.  If possible something that would work for both bass/blues and fluking. Or should I really just look for 2 different rods.  I'm more comfortable and familiar with spinning gear.   
I was looking at the Ugly Stick Bigwater rods in 6.5-7ft either 1/2-3oz or 1-6oz.  But I'm open to other suggestions.
I seem to remember whatever Rod had on the boat last fall being decent and seemed affordable, what was that?   

i bought a tiger light medium heavy jigging rod strong but sensitive great rod but pricey i paid 70$

Offline ChrisL

  • Super Hero Member
  • *****
  • Posts: 2790
  • Karma: +0/-0
    • Oak Lane Woodworks
Re: Rod selection advice
« Reply #10 on: July 07, 2013, 02:18:30 PM »
Just ordered the Tsunami 6'6" mh jigging rod from Tackle Direct.  Going to match it up with a Peerless No9 I just overhauled and some 30lb PP.  
Ordered some sinkers and tying some bucktails.  Just about ready to roll.  ;D

Thanks for all the input.
« Last Edit: July 07, 2013, 02:18:57 PM by ChrisL »

Offline Reel Time

  • Moderator
  • Super Hero Member
  • *****
  • Posts: 1497
  • Karma: +0/-0
Re: Rod selection advice
« Reply #11 on: July 07, 2013, 02:24:41 PM »
 Can't go wrong with that set up
All your tuna's are belong to me

 

NJSFlogofinal1

BSX

terrafin

Heavy Duty truck Parts On Line

Web Site Design

JSBSE_430x80.png

Know Before You Go

Local Weather | Marine Bouy Weather | Inshore Forecast | Offshore Forecast | Interactive Wind Charts | Tide Charts | Sea Surface Temps | Chlorophyll Concentrates | Online Chart Viewer

-

new jersey marine weather forecastterrafin

-