Author Topic: any1 use/get yamaha's command link?  (Read 4813 times)

Offline Reel Time

  • Moderator
  • Super Hero Member
  • *****
  • Posts: 1497
  • Karma: +0/-0
any1 use/get yamaha's command link?
« on: April 07, 2007, 07:53:53 AM »
 looking to go with the command link system for the fuel management since i cant use flowscan with my motor.

 i have been looking and searching the web but cannot find any info about the system, such as what is needed and where to get it.
All your tuna's are belong to me


Offline Capt. Ed

  • Newbie
  • *
  • Posts: 0
  • Karma: +0/-0
Re: any1 use/get yamaha's command link?
« Reply #1 on: April 07, 2007, 10:49:06 AM »
Hi Reel Time,

Give my close friend, Bob Tweer, a call at Hobby Lobby Marine (732-929-1711) or http://www.hobbylobbymarine.com/.

He is a Yamaha Distributor (only 3 in the state - more about that at a later time). He can lead you in the right direction.

Tell him Eddie Marut referred you ... if you would prefer, I can call him for you.

Best wishes,

Capt. Ed
« Last Edit: April 07, 2007, 11:04:19 AM by Capt. Rod/Hotrod »


Offline Reel Time

  • Moderator
  • Super Hero Member
  • *****
  • Posts: 1497
  • Karma: +0/-0
Re: any1 use/get yamaha's command link?
« Reply #2 on: April 07, 2007, 03:14:46 PM »
 you know, honestly they where one of the places i was gonna call. was referred to go there for my services also, and they are close to where im slipped, so i'll give them a buzz durign the week on lunch break.
All your tuna's are belong to me

Offline Capt. Ed

  • Newbie
  • *
  • Posts: 0
  • Karma: +0/-0
Re: any1 use/get yamaha's command link?
« Reply #3 on: April 07, 2007, 08:17:53 PM »
Hi Reel Time,

Mark (head mechanic) is a good friend and btw, he is a good fisherman.

Bob Tweer and his brother are "get it done" people.

If you need help, call me on my cell (732-859-1212) and I am sure he will help out.

Best wishes,

Ed


Offline Reel Time

  • Moderator
  • Super Hero Member
  • *****
  • Posts: 1497
  • Karma: +0/-0
Re: any1 use/get yamaha's command link?
« Reply #4 on: April 07, 2007, 08:59:20 PM »
 awesome, i will deffinently drop your name, i will call monday on lunch.

 dont know how much this will be, but if its steep like i think it will be, it might have to wait another week or two.
All your tuna's are belong to me

Offline Reel Time

  • Moderator
  • Super Hero Member
  • *****
  • Posts: 1497
  • Karma: +0/-0
Re: any1 use/get yamaha's command link?
« Reply #5 on: April 11, 2007, 09:36:54 PM »
 well, it turns out i can use flowscan on my motor, the info from flowscans web site is a little vauge on what  models its refering to, think its the i/o motors, or older models or some crap. my motor, an '06 f150 does not have the duel fuel pumps that flwo scan says,, it turn out it has an engine driven mechanical fuel pump.
 
 called yamaha directly and spoke to thier marine dept, and was squared away in no time. and i must say i was very satisfied with the service i recieved. the call taker had to call me back so he could research the whole deal to confirm i was given the correct info.

 soo,, woot, no 1k+ command link system,, can get away with about $250 for a flowscan.
All your tuna's are belong to me

Offline Capt. Ed

  • Newbie
  • *
  • Posts: 0
  • Karma: +0/-0
Re: any1 use/get yamaha's command link?
« Reply #6 on: April 14, 2007, 03:31:39 AM »
Hi Reel,

Excellent!

Good luck with it ...

Capt. Ed


 

NJSFlogofinal1

BSX

terrafin

Heavy Duty truck Parts On Line

Web Site Design

Bill Chaser Charters

Know Before You Go

Local Weather | Marine Bouy Weather | Inshore Forecast | Offshore Forecast | Interactive Wind Charts | Tide Charts | Sea Surface Temps | Chlorophyll Concentrates | Online Chart Viewer

-

new jersey marine weather forecastterrafin

-