Author Topic: FishBones hits the Bay  (Read 3297 times)

Offline Lt.Willy

  • Member
  • ****
  • Posts: 61
  • Karma: +0/-0
  • HydraSport Vector 2250 FishBones
FishBones hits the Bay
« on: April 28, 2011, 09:08:21 AM »
Had mechanic look at the Evinrude, would not idle below 1200 rpm. He made adjustments but on the hose, he said it may not idle under load and if not I need a carb rebuild. He told me to try and blow it out on the water.
I did as told and took a half bushel of clams with me.

Well the carbs are going to get rebuilt next week, but there were stripers to be had, had non stop action for two hours on the hook near the Coast Guard station. At least 6 just under 28", and two keeps at 32 and 30 inches. Three monster run offs and one good size girl lost right at the boat.
Left my camera home but got this shot just before cleaning time.
Ran into my buddy Pilot 2550 just when he was pulling the hook, sweet looking boat.


Offline Lt.Willy

  • Member
  • ****
  • Posts: 61
  • Karma: +0/-0
  • HydraSport Vector 2250 FishBones
Re: FishBones hits the Bay
« Reply #1 on: April 28, 2011, 09:10:36 AM »
Oh yea, Jeff she had Bunker in the belly t^


Offline Hotrod

  • Administrator
  • Super Hero Member
  • *****
  • Posts: 20999
  • Karma: +0/-0
  • The Phyllis Ann
    • NJ Outdoords Media
Re: FishBones hits the Bay
« Reply #2 on: April 28, 2011, 09:16:05 AM »
Nice t^  this was North?



Offline Lt.Willy

  • Member
  • ****
  • Posts: 61
  • Karma: +0/-0
  • HydraSport Vector 2250 FishBones
Re: FishBones hits the Bay
« Reply #3 on: April 28, 2011, 09:27:41 AM »
Roger, Raritan Bay.


Offline striperdad

  • Sr. Member
  • ***
  • Posts: 402
  • Karma: +0/-0
Re: FishBones hits the Bay
« Reply #4 on: April 28, 2011, 10:02:03 AM »
Oh yeah the bay is hot right now.

Offline gymrat987654321

  • Super Hero Member
  • *****
  • Posts: 2305
  • Karma: +0/-0
Re: FishBones hits the Bay
« Reply #5 on: April 28, 2011, 11:00:10 AM »
nice t^

Offline Bucktail

  • Just a Jig-alo
  • Admin
  • Super Hero Member
  • *****
  • Posts: 12628
  • Karma: +0/-0
  • Have jigs. Will travel.
    • NJ Saltwater Fishing Tackle
Re: FishBones hits the Bay
« Reply #6 on: April 28, 2011, 11:35:12 AM »
Nice job. t^


Offline hiking

  • Super Hero Member
  • *****
  • Posts: 1011
  • Karma: +0/-0
Re: FishBones hits the Bay
« Reply #7 on: April 28, 2011, 11:43:48 AM »
thanks for the report, good job with the fish slt
Paul cell 908-415-9542

Offline SurfJockey

  • Super Hero Member
  • *****
  • Posts: 3913
  • Karma: +0/-0
    • Facebook
Re: FishBones hits the Bay
« Reply #8 on: April 28, 2011, 12:07:57 PM »
Nice work.  Sounds like a good day.  Hope your repairs go smoothly.  t^
IBSP #1-4150 NJBBA #4753 - Red 2007 Ford Explorer Sport-Trac


Offline Tbone

  • Sr. Member
  • ***
  • Posts: 354
  • Karma: +0/-0
Re: FishBones hits the Bay
« Reply #9 on: April 28, 2011, 03:27:40 PM »
Bill, Did your wife kill you for cleaning the fish in the kitchen??  smk.  Congrats on the catch and Gook luck with the carbs  cfzd
T-Bone

Offline pilot2550

  • Super Hero Member
  • *****
  • Posts: 1924
  • Karma: +0/-0
  • Z'Obsession
Re: FishBones hits the Bay
« Reply #10 on: April 28, 2011, 03:59:24 PM »
Willy,

Beautiful job on the fish, especially running solo!!!  chrz That's a killer losing the slob for the day at the net  thud Hope the repair gets done quick and the surgery is light on your wallet.    t^

Offline Reckless

  • AKA Frankeu
  • Super Hero Member
  • *****
  • Posts: 2734
  • Karma: +0/-0
Re: FishBones hits the Bay
« Reply #11 on: April 28, 2011, 04:15:06 PM »
 You should try Mercury quick kleen. I had a hard time idling last year. Mixed a container of it with 2 gal gas. Disconnected the main tank hooked up the 2 gal and ran it. Cleaned it up.

Offline Scott G.

  • Super Hero Member
  • *****
  • Posts: 3594
  • Karma: +0/-0
  • Fish out of Keyport
Re: FishBones hits the Bay
« Reply #12 on: April 28, 2011, 05:14:57 PM »
 t^ t^   NICE FISHY    t^ t^
Fishing, with me, has always been an excuse to drink in the daytime.

Offline Salty Dog

  • Super Hero Member
  • *****
  • Posts: 3961
  • Karma: +0/-0
Re: FishBones hits the Bay
« Reply #13 on: April 28, 2011, 05:20:25 PM »
Turned out to have a positive note . t^

Offline Lt.Willy

  • Member
  • ****
  • Posts: 61
  • Karma: +0/-0
  • HydraSport Vector 2250 FishBones
Re: FishBones hits the Bay
« Reply #14 on: April 28, 2011, 05:29:34 PM »
Thanks for the advise Reckless, have done the same in the past. I don't believe I have a clogg or varnish situation though.
The carbs have never been touched, it's a 97 motor, it's way over due to have a rebuild kit on it.
I believe I may have vacuum or seal type of thing going on, at higher rpm, above say 1200 it runs like a swiss watch all the way to 5500 , just will not idle. Wayne at Twin Lights says the mechanic Steve is real good, he will sort it out.
I just hope that he finds it before my wallet runs out.


Offline makokeith

  • Hero Member
  • ****
  • Posts: 883
  • Karma: +0/-0
  • Personal Best 38LBS
Re: FishBones hits the Bay
« Reply #15 on: April 28, 2011, 07:38:20 PM »
Nice report t^ Sorry to hear about the carbs.
Keith
Franklin, N.J.
Proud member of the I.B.E.W. local 827

MAKO 250wa twin 150 E-tecs
  Happily fishing out of Atlantic Highlands Municiple Marina.

 

NJSFlogofinal1

BSX

terrafin

Heavy Duty truck Parts On Line

Web Site Design

rfasig.png

Know Before You Go

Local Weather | Marine Bouy Weather | Inshore Forecast | Offshore Forecast | Interactive Wind Charts | Tide Charts | Sea Surface Temps | Chlorophyll Concentrates | Online Chart Viewer

-

new jersey marine weather forecastterrafin

-