« previous next »
Pages: [1] 2   Go Down

Author Topic: Switch/Guage Panel Rebuild  (Read 9102 times)

Offline Fishin Dude

  • Super Hero Member
  • *****
  • Posts: 4526
  • Karma: +0/-0
  • FISH CONTROL MY BRAIN
Switch/Guage Panel Rebuild
« on: March 24, 2012, 08:20:37 AM »
I got tired of looking at the faded out carbon fiber switch panel & switches and decided a new look was needed.

After lableing and removing all of the wires, I removed the panel, then the switches and gauges. I cleaned it up, and reinforced a 2 small cracks near the screw holes with crazy glue and fibers on the rear side.

After obtaining some sample material,I made the decision to change from the carbon fiber to a wood grain look, which was done with a cool adheasive sheet from rvinyl.com, which was very easy to work with.

I changed out just the switch actuarors, the switches themselves were still good, saved some beer money there. Cleaned up the gauges, painted the letters on the tab switch housing,and reinstalled everything.  TT^   
Logged
I've spent most of my life fishing, the rest I've just wasted     <'((((><

Offline Reckless

  • AKA Frankeu
  • Super Hero Member
  • *****
  • Posts: 2734
  • Karma: +0/-0
Re: Switch/Guage Panel Rebuild
« Reply #1 on: March 24, 2012, 08:23:51 AM »
 Looks real good. Looks like a Seaswirl!
Logged

Offline Fishin Dude

  • Super Hero Member
  • *****
  • Posts: 4526
  • Karma: +0/-0
  • FISH CONTROL MY BRAIN
Re: Switch/Guage Panel Rebuild
« Reply #2 on: March 24, 2012, 08:50:30 AM »
Seaswirl it is. t^
Logged
I've spent most of my life fishing, the rest I've just wasted     <'((((><

Offline Pops Soul

  • SKIP <*}}}><
  • Super Hero Member
  • *****
  • Posts: 5384
  • Karma: +0/-0
  • SKIP <*}}}><
Re: Switch/Guage Panel Rebuild
« Reply #3 on: March 24, 2012, 09:34:53 AM »
Quote from: Reckless on March 24, 2012, 08:23:51 AM
Looks real good. Looks like a Seaswirl!
Looks Like a Lincoln Town car NOW  TT^ Nice Darren
Logged
It's Not A Knot Until You Pull It Tight!

Offline Reckless

  • AKA Frankeu
  • Super Hero Member
  • *****
  • Posts: 2734
  • Karma: +0/-0
Re: Switch/Guage Panel Rebuild
« Reply #4 on: March 24, 2012, 09:39:19 AM »
Where did you get those switches?  slt
Logged

Offline BigAl13

  • Super Hero Member
  • *****
  • Posts: 6026
  • Karma: +0/-0
  • Fish out of Keyport
Re: Switch/Guage Panel Rebuild
« Reply #5 on: March 24, 2012, 09:43:20 AM »
nice t^
Logged
Its better to sit in a boat and think about God, than to sit in a church and think about fishing.

Offline Hunter 2

  • RFA-NJ Member
  • Super Hero Member
  • *****
  • Posts: 12156
  • Karma: +0/-0
  • 36' Topaz Express "Hallie Loren"
Re: Switch/Guage Panel Rebuild
« Reply #6 on: March 24, 2012, 09:58:33 AM »
Pimp my ride. TT^
Logged
Eddie "Hunter 2"
36' Topaz "Hallie Loren"    Charter boat sailing from Wagners Marina, Keyport NJ


 Life is short, Fish Hard.

Offline Maritime Matt

  • Sponsor
  • Hero Member
  • *****
  • Posts: 688
  • Karma: +0/-0
  • Maritime Skiff 20' Pioneer Pilothouse USCG Lic
    • TASKMARINE.COM
Re: Switch/Guage Panel Rebuild
« Reply #7 on: March 24, 2012, 10:42:15 AM »
I like the old faded. Easier to guess what swich works what. ;D
Logged

  WWW.TASKMARINE.COM     Marine SERVICE, Parts & More

Offline Hotrod

  • Administrator
  • Super Hero Member
  • *****
  • Posts: 20999
  • Karma: +0/-0
  • The Phyllis Ann
    • NJ Outdoords Media
Re: Switch/Guage Panel Rebuild
« Reply #8 on: March 24, 2012, 10:42:40 AM »
 nice job clp
Logged


Offline IrishAyes

  • Fishing At It's Finest
  • Admin
  • Super Hero Member
  • *****
  • Posts: 17408
  • Karma: +0/-0
Re: Switch/Guage Panel Rebuild
« Reply #9 on: March 24, 2012, 11:02:38 AM »
Nice job Darren. I think Rick from American Restoration is looking to hire.  TT^
Logged
Captain Joe of the Irish Ayes

May the holes in your net be no larger than the fish in it.  ~Irish Blessing

Offline Fishin Dude

  • Super Hero Member
  • *****
  • Posts: 4526
  • Karma: +0/-0
  • FISH CONTROL MY BRAIN
Re: Switch/Guage Panel Rebuild
« Reply #10 on: March 24, 2012, 11:05:09 AM »
Quote from: Maritime Matt on March 24, 2012, 10:42:15 AM
I like the old faded. Easier to guess what swich works what. ;D

As long as you don't hit the "Eject" switch by mistake. ;D
Logged
I've spent most of my life fishing, the rest I've just wasted     <'((((><

Offline Fishin Dude

  • Super Hero Member
  • *****
  • Posts: 4526
  • Karma: +0/-0
  • FISH CONTROL MY BRAIN
Re: Switch/Guage Panel Rebuild
« Reply #11 on: March 24, 2012, 11:32:48 AM »
Quote from: Reckless on March 24, 2012, 09:39:19 AM
Where did you get those switches?  slt

The actuators came from http://www.shop.newwiremarine.com/Rocker-Switches-and-Accessories_c15.htm

They have a large selection, and had all of the ones that I wanted. $4.99 each. Choose additional shipping options, and choose Priority Mail, it's $7 cheaper than UPS. Comes from NC, had it in the mailbox in just a few days.  I also recommend the Carling Actuator Tool. Makes the actuator just pop right off. Without the tool you can use two small screwdrivers,(I think they call it Kracka Rigg'in), but it is always better to have the right tool for the job.
Logged
I've spent most of my life fishing, the rest I've just wasted     <'((((><

Offline Reckless

  • AKA Frankeu
  • Super Hero Member
  • *****
  • Posts: 2734
  • Karma: +0/-0
Re: Switch/Guage Panel Rebuild
« Reply #12 on: March 24, 2012, 04:07:03 PM »
Thanks!
Logged

Offline Reckless

  • AKA Frankeu
  • Super Hero Member
  • *****
  • Posts: 2734
  • Karma: +0/-0
Re: Switch/Guage Panel Rebuild
« Reply #13 on: March 24, 2012, 05:38:08 PM »
Is the Nav/anc switch 2 position? 1 position is both on and 1 just anchor middle off. Thanks!
Logged

Offline Bucktail

  • Just a Jig-alo
  • Admin
  • Super Hero Member
  • *****
  • Posts: 12628
  • Karma: +0/-0
  • Have jigs. Will travel.
    • NJ Saltwater Fishing Tackle
Re: Switch/Guage Panel Rebuild
« Reply #14 on: March 24, 2012, 08:02:46 PM »
Looking good Darren! t^
Logged

Offline Kenny

  • Super Hero Member
  • *****
  • Posts: 7595
  • Karma: +0/-0
  • My Fishing Buddie !
Re: Switch/Guage Panel Rebuild
« Reply #15 on: March 24, 2012, 08:47:05 PM »
Sweet job clp
Logged

Offline Fishin Dude

  • Super Hero Member
  • *****
  • Posts: 4526
  • Karma: +0/-0
  • FISH CONTROL MY BRAIN
Re: Switch/Guage Panel Rebuild
« Reply #16 on: March 24, 2012, 09:01:43 PM »
Quote from: Reckless on March 24, 2012, 05:38:08 PM
Is the Nav/anc switch 2 position? 1 position is both on and 1 just anchor middle off. Thanks!

Yes,that's correct. I just replaced the actuator( faceplate) on my factory origional switch.
Logged
I've spent most of my life fishing, the rest I've just wasted     <'((((><

Offline Scott G.

  • Super Hero Member
  • *****
  • Posts: 3594
  • Karma: +0/-0
  • Fish out of Keyport
Re: Switch/Guage Panel Rebuild
« Reply #17 on: March 26, 2012, 08:12:38 AM »
 TT^ clp TT^
Logged
Fishing, with me, has always been an excuse to drink in the daytime.

Offline Andys Delight

  • Super Hero Member
  • *****
  • Posts: 1847
  • Karma: +0/-0
Re: Switch/Guage Panel Rebuild
« Reply #18 on: March 26, 2012, 08:18:46 AM »
Not one comment or mention that he has an eject button!?   rofla rofla

Is that passenger or self eject?  Sometimes I think I could use passenger eject haha. 
Logged
The cure for everything is salt water: sweat, tears, and the sea.

Offline Fishin Dude

  • Super Hero Member
  • *****
  • Posts: 4526
  • Karma: +0/-0
  • FISH CONTROL MY BRAIN
Re: Switch/Guage Panel Rebuild
« Reply #19 on: March 26, 2012, 09:31:37 AM »
Quote from: Andys Delight on March 26, 2012, 08:18:46 AM
Not one comment or mention that he has an eject button!?   rofla rofla

Is that passenger or self eject?  Sometimes I think I could use passenger eject haha. 
[
Passenger. Not a valid youtube URL youtube]
Logged
I've spent most of my life fishing, the rest I've just wasted     <'((((><
Pages: [1] 2   Go Up
« previous next »
 

NJSFlogofinal1

BSX

terrafin

Heavy Duty truck Parts On Line

Web Site Design

rfasig.png

Know Before You Go

Local Weather | Marine Bouy Weather | Inshore Forecast | Offshore Forecast | Interactive Wind Charts | Tide Charts | Sea Surface Temps | Chlorophyll Concentrates | Online Chart Viewer

-

new jersey marine weather forecastterrafin

-