Author Topic: Update on the Boat Motor  (Read 3494 times)

Offline fellinger

  • Super Hero Member
  • *****
  • Posts: 3171
  • Karma: +0/-0
    • SafeTec Training Services
Update on the Boat Motor
« on: November 16, 2012, 02:47:39 PM »
As you may recall right before the storm I ran into some motor trouble and hauled the boat home. Well, my buddy gave me a call the other day after starting to do some diagnosis....

Looks like I need new risers and manifolds. There was about 1-2qts of water in the block. Also one of the rods had snapped (presumably corroded d/t the water) so, she had been running on 5 cylinders. We need to check the head for cracks, but are pretty hopeful there are none.

Now to do the math and figure out if I go the repair route or a Jasper from Rick..... I guess I'll put replacement boat shopping on hold for another season or two so I can try and recoup some of the money being laid out for this repair.


Fred, fishing the "Kristy Marie" from Manasquan River Club. Channels 16/67/68.


Offline ChrisL

  • Super Hero Member
  • *****
  • Posts: 2790
  • Karma: +0/-0
    • Oak Lane Woodworks
Re: Update on the Boat Motor
« Reply #1 on: November 16, 2012, 02:53:28 PM »
 nosmly


Offline IKAT

  • Super Hero Member
  • *****
  • Posts: 1411
  • Karma: +0/-0
Re: Update on the Boat Motor
« Reply #2 on: November 16, 2012, 02:54:29 PM »
Fred
I would talk to Rick---Long/Short block  5hrug

I know a lot of people looking for a new boat now--Truely a Shame but see what happens.
When looking for something close now might be good but need to know NOW--If you get what I mean

Offline dafishh15

  • New Member
  • *
  • Posts: 3
  • Karma: +0/-0
Re: Update on the Boat Motor
« Reply #3 on: November 16, 2012, 02:57:44 PM »
people looking for boats and I'm looking to get rid of mine


Offline IKAT

  • Super Hero Member
  • *****
  • Posts: 1411
  • Karma: +0/-0
Re: Update on the Boat Motor
« Reply #4 on: November 16, 2012, 02:58:50 PM »
people looking for boats and I'm looking to get rid of mine



Post it up here   t^

Offline Still Running

  • AKA-Rick(Dieselhp)
  • Admin
  • Super Hero Member
  • *****
  • Posts: 8426
  • Karma: +0/-0
    • truck parts
Re: Update on the Boat Motor
« Reply #5 on: November 16, 2012, 03:15:33 PM »
Fred,
We might be able to get the new risers and manifolds with the long block. Will need the specs.
Fishing Sandy Hook and anywhere I can get on a boat.




My biggest fear is when I die my wife sells all of my fishing tackle for what she thinks I paid for it!
Www.HNCTruckParts.com

Offline fellinger

  • Super Hero Member
  • *****
  • Posts: 3171
  • Karma: +0/-0
    • SafeTec Training Services
Re: Update on the Boat Motor
« Reply #6 on: November 16, 2012, 03:39:06 PM »
Fred,
We might be able to get the new risers and manifolds with the long block. Will need the specs.

Ok, Rick. I appreciate that offer as well!

I really need to do some soul searching. If I go the Jasper route I am at probably close to $3k for the repair. Using what I have now and replacing the head and risers/manifold I am probably at $1500+. I know I will not be keeping the boat too long. Now I need to determine if it's long enough to warrant a rebuild vs repair.....


Fred, fishing the "Kristy Marie" from Manasquan River Club. Channels 16/67/68.


Offline Still Running

  • AKA-Rick(Dieselhp)
  • Admin
  • Super Hero Member
  • *****
  • Posts: 8426
  • Karma: +0/-0
    • truck parts
Re: Update on the Boat Motor
« Reply #7 on: November 16, 2012, 03:40:50 PM »
 t^
Fishing Sandy Hook and anywhere I can get on a boat.




My biggest fear is when I die my wife sells all of my fishing tackle for what she thinks I paid for it!
Www.HNCTruckParts.com

Offline BigAl13

  • Super Hero Member
  • *****
  • Posts: 6026
  • Karma: +0/-0
  • Fish out of Keyport
Re: Update on the Boat Motor
« Reply #8 on: November 16, 2012, 03:46:36 PM »
Or you can buy my boat for 4500 take the swap the motors and sell mine ;D
Its better to sit in a boat and think about God, than to sit in a church and think about fishing.


Offline wb

  • Super Hero Member
  • *****
  • Posts: 5274
  • Karma: +0/-0
Re: Update on the Boat Motor
« Reply #9 on: November 16, 2012, 04:05:50 PM »
you will need manifolds/risers either way

Offline fellinger

  • Super Hero Member
  • *****
  • Posts: 3171
  • Karma: +0/-0
    • SafeTec Training Services
Re: Update on the Boat Motor
« Reply #10 on: November 16, 2012, 04:07:53 PM »
you will need manifolds/risers either way

Yep.... I just need to value the repair/replacement vs potential use and later sale. I know you can never get your money back from the boat but, I want to be as close as possible. With the intent to get a bigger one in the coming seasons the best bang for my buck is probably just a repair at this point.


Fred, fishing the "Kristy Marie" from Manasquan River Club. Channels 16/67/68.

Offline wb

  • Super Hero Member
  • *****
  • Posts: 5274
  • Karma: +0/-0
Re: Update on the Boat Motor
« Reply #11 on: November 16, 2012, 04:09:16 PM »
DIY repair too if you are handy

 

NJSFlogofinal1

BSX

terrafin

Heavy Duty truck Parts On Line

Web Site Design

rfasig.png

Know Before You Go

Local Weather | Marine Bouy Weather | Inshore Forecast | Offshore Forecast | Interactive Wind Charts | Tide Charts | Sea Surface Temps | Chlorophyll Concentrates | Online Chart Viewer

-

new jersey marine weather forecastterrafin

-