Author Topic: Looking for a Washing Machine Repairman  (Read 6116 times)

Offline Kenny

  • Super Hero Member
  • *****
  • Posts: 7595
  • Karma: +0/-0
  • My Fishing Buddie !
Re: Looking for a Washing Machine Repairman
« Reply #20 on: March 14, 2013, 10:21:22 PM »
 rofla rofla


Offline Bucktail

  • Just a Jig-alo
  • Admin
  • Super Hero Member
  • *****
  • Posts: 12628
  • Karma: +0/-0
  • Have jigs. Will travel.
    • NJ Saltwater Fishing Tackle
Re: Looking for a Washing Machine Repairman
« Reply #21 on: March 14, 2013, 11:43:37 PM »
OK.  It's not the child lock or the delay mode.  It has no power, no lights, nothing.  We switched outlets and my brother-in-law did tests with the beeper thing.  And that website doesn't list Samsung. rgmn

Forget the 12 pack.  I'll buy a case for whoever can fix it. t^


Offline Reckless

  • AKA Frankeu
  • Super Hero Member
  • *****
  • Posts: 2734
  • Karma: +0/-0
Re: Looking for a Washing Machine Repairman
« Reply #22 on: March 15, 2013, 04:35:40 AM »
Maybe this will help?  5hrug


"The power routing is from the emi filter to the main control board and to the door lock assembly. On the picture I will send to you is the routing of the power and what needs to be checked to determine the fault with your washer. From what you have said it could be the emi filter, the door lock or the control board. "

Offline Hunter 2

  • RFA-NJ Member
  • Super Hero Member
  • *****
  • Posts: 12156
  • Karma: +0/-0
  • 36' Topaz Express "Hallie Loren"
Re: Looking for a Washing Machine Repairman
« Reply #23 on: March 15, 2013, 05:39:18 AM »
That's too bad.  Check Samsungs websight for a certified repair technician in your area.  The board is most likely dead.
You can also check the cost of a new board online at a appliance parts. Com store and replace yourself.  This worked for me when I changed my GE dishwashers control module. 
Eddie "Hunter 2"
36' Topaz "Hallie Loren"    Charter boat sailing from Wagners Marina, Keyport NJ


 Life is short, Fish Hard.


Offline Still Running

  • AKA-Rick(Dieselhp)
  • Admin
  • Super Hero Member
  • *****
  • Posts: 8426
  • Karma: +0/-0
    • truck parts
Re: Looking for a Washing Machine Repairman
« Reply #24 on: March 15, 2013, 05:49:30 AM »
Maybe this will help?  5hrug


"The power routing is from the emi filter to the main control board and to the door lock assembly. On the picture I will send to you is the routing of the power and what needs to be checked to determine the fault with your washer. From what you have said it could be the emi filter, the door lock or the control board. "

Yup
Since you have the schamatic just trace the power from the plug to the board. If you loose it a long the way, that's it.
Get a meter and call me. I will tell you where to to check for power.
Fishing Sandy Hook and anywhere I can get on a boat.




My biggest fear is when I die my wife sells all of my fishing tackle for what she thinks I paid for it!
Www.HNCTruckParts.com

Offline Kenny

  • Super Hero Member
  • *****
  • Posts: 7595
  • Karma: +0/-0
  • My Fishing Buddie !
Re: Looking for a Washing Machine Repairman
« Reply #25 on: March 15, 2013, 08:37:30 AM »
I wish you were not 100 miles away...

But then you did up the prize to a case of beer  ;D

If the outlet is good....it's probably some thing with you power feed...and or I have fixed many a printed circut board with just soldering a connection...when the main power feed to the boards get hot the solder gets loose and the vibration breaks the connection....

At this point you need to get into the electrics and poke around for a loose wire or ...smell the circut board too...if it's fried it will smell burnted...also with the unit plugged in give it the smack in the side test to see if that makes the power flicker meaning it's a loose connection...

I might have to make the drive and come claim that case of beer this weekend  ;D

Offline Still Running

  • AKA-Rick(Dieselhp)
  • Admin
  • Super Hero Member
  • *****
  • Posts: 8426
  • Karma: +0/-0
    • truck parts
Re: Looking for a Washing Machine Repairman
« Reply #26 on: March 15, 2013, 08:40:36 AM »
I wish you were not 100 miles away...

But then you did up the prize to a case of beer  ;D


I might have to make the drive and come claim that case of beer this weekend  ;D

Road Trip!!!
Fishing Sandy Hook and anywhere I can get on a boat.




My biggest fear is when I die my wife sells all of my fishing tackle for what she thinks I paid for it!
Www.HNCTruckParts.com


Offline ChrisL

  • Super Hero Member
  • *****
  • Posts: 2790
  • Karma: +0/-0
    • Oak Lane Woodworks
Re: Looking for a Washing Machine Repairman
« Reply #27 on: March 15, 2013, 08:44:28 AM »
Just buy new clothes and throw out the dirty ones.    You can even turn the clothes inside-out to get two days out of them.   ;D

Offline Reel Time

  • Moderator
  • Super Hero Member
  • *****
  • Posts: 1497
  • Karma: +0/-0
Re: Looking for a Washing Machine Repairman
« Reply #28 on: March 15, 2013, 04:41:50 PM »
Just buy new clothes and throw out the dirty ones.    You can even turn the clothes inside-out to get two days out of them.   ;D

 Flip'em inside out to get 4 days use
All your tuna's are belong to me


 

NJSFlogofinal1

BSX

terrafin

Heavy Duty truck Parts On Line

Web Site Design

JSBSE_430x80.png

Know Before You Go

Local Weather | Marine Bouy Weather | Inshore Forecast | Offshore Forecast | Interactive Wind Charts | Tide Charts | Sea Surface Temps | Chlorophyll Concentrates | Online Chart Viewer

-

new jersey marine weather forecastterrafin

-