Author Topic: Anyone have MMSI #?  (Read 9052 times)

Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Anyone have MMSI #?
« Reply #20 on: October 10, 2007, 06:06:35 AM »
What happens when I sell a radio that has my MMSI # in it?

You can only program it twice and has ben programmed once?
 Only info I have seen is when selling vessel w/ radio already programmed, then you need new # for new setup.
I am going to just sell radio.

Do I need a new MMSI just for the radio?

I wouldn't want to sell my radio with my MMSI in there for someone to misuse.


Offline Pops Soul

  • SKIP <*}}}><
  • Super Hero Member
  • *****
  • Posts: 5384
  • Karma: +0/-0
  • SKIP <*}}}><
Re: Anyone have MMSI #?
« Reply #21 on: October 10, 2007, 09:19:09 AM »
Wish my wife would get a upgrade in her job so I could get some cool new toys ;)
It's Not A Knot Until You Pull It Tight!


Offline fishinfool

  • Hero Member
  • ****
  • Posts: 800
  • Karma: +0/-0
    • Facebook Page
Re: Anyone have MMSI #?
« Reply #22 on: October 10, 2007, 09:31:14 AM »
Wish my wife would get a upgrade in her job so I could get some cool new toys ;)

Your a riot POPS!!

Offline Luna Sea 5

  • Admin
  • Super Hero Member
  • *****
  • Posts: 12104
  • Karma: +0/-0
  • Nick (Luna Sea 5)
    • My Facebook Profile
Re: Anyone have MMSI #?
« Reply #23 on: October 10, 2007, 10:45:38 AM »
 ;D
Fish out of Toms River NJ.
Call Nick for open boat, 973-417-5756, or on Channel 68.

Team Luna Sea 6


Offline ped579

  • NJSF Field Reporter
  • Super Hero Member
  • *****
  • Posts: 11408
  • Karma: +1/-0
  • Happiness is long casts, tight lines & bent rods
Re: Anyone have MMSI #?
« Reply #24 on: October 10, 2007, 12:29:20 PM »
More like... >:D
IN GOD WE TRUST

"Hypocrisy is not a fault these days - it is a lifestyle"

NJBBA: 4567

Ham Call; N2HYG Monitor RPT.  146.835

Offline Pops Soul

  • SKIP <*}}}><
  • Super Hero Member
  • *****
  • Posts: 5384
  • Karma: +0/-0
  • SKIP <*}}}><
Re: Anyone have MMSI #?
« Reply #25 on: October 10, 2007, 02:15:47 PM »
Wish my wife would get a upgrade in her job so I could get some cool new toys ;)

Your a riot POPS!!


TT^ You Go Girl, Hopefully a riot in a cute kind of way ;D
It's Not A Knot Until You Pull It Tight!

Offline fishinfool

  • Hero Member
  • ****
  • Posts: 800
  • Karma: +0/-0
    • Facebook Page
Re: Anyone have MMSI #?
« Reply #26 on: October 10, 2007, 02:29:26 PM »
 rofl


Offline SouthPaw

  • Hero Member
  • ****
  • Posts: 764
  • Karma: +0/-0
  • There's more to it than catching
Re: Anyone have MMSI #?
« Reply #27 on: October 10, 2007, 06:25:34 PM »
found My #'s 338034452 Boat is SouthPaw
A good day of fishing is better than a bad day of fishing. A bad day of fishing is better than a good day of work. That means work sucks!

Offline Reel Time

  • Moderator
  • Super Hero Member
  • *****
  • Posts: 1497
  • Karma: +0/-0
Re: Anyone have MMSI #?
« Reply #28 on: October 10, 2007, 07:23:26 PM »
 not sure if i have this ability or not,,, i have the lowrance ff mod#LMS-339C DF iGPS  and icom 302 radio. will have to research it and if it does just gotta find a day to do it, or wait till its yanked outta the water for the season.
All your tuna's are belong to me


Offline Luna Sea 5

  • Admin
  • Super Hero Member
  • *****
  • Posts: 12104
  • Karma: +0/-0
  • Nick (Luna Sea 5)
    • My Facebook Profile
Re: Anyone have MMSI #?
« Reply #29 on: October 10, 2007, 07:55:45 PM »
not sure if i have this ability or not,,, i have the lowrance ff mod#LMS-339C DF iGPS  and icom 302 radio. will have to research it and if it does just gotta find a day to do it, or wait till its yanked outta the water for the season.
you can tell if your radio has it by a red emergency call button on it.
Fish out of Toms River NJ.
Call Nick for open boat, 973-417-5756, or on Channel 68.

Team Luna Sea 6

Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Anyone have MMSI #?
« Reply #30 on: October 10, 2007, 07:56:40 PM »
The Icom 302 will allow you to send position and distress when connected to gps (as well as make DSC calling). It can not receive a GPS position from another user.

Those are on the slightly higher end models.

I just received my SH gx1280s which does about everything.

If anyone is looking to upgrade for whatever reason, I HIGHLY reco this unit. Ordered yesterday and reeived today from here:

These units are being xlosed out, have a 3 year warranty and CAN NOT BE BEAT for price:feature ratio.

http://www.northeastmarineelectronics.com/index.asp?PageAction=VIEWPROD&ProdID=326

DSC polling is the feature you will be looking for as far as being able to receive anothers GPS position.

Some units (like my SH plotter) can show the others users position right on my GPS map.

Will I use it? I hope so because it sure sounds cool.

I will at least get to be able to test it out with my pops as his unit is capable of both too.

Offline ped579

  • NJSF Field Reporter
  • Super Hero Member
  • *****
  • Posts: 11408
  • Karma: +1/-0
  • Happiness is long casts, tight lines & bent rods
Re: Anyone have MMSI #?
« Reply #31 on: October 10, 2007, 07:58:24 PM »
Hi Greg,

I glommed this off the Icom Site.  It looks like your good to go if you have the GPS output needed for the radio (see below).

The M302 has built-in DSC capability. The DSC (Digital Selective Calling) allows you to send a formatted distress message in an emergency. Position data is automatically exchanged between the two stations.

GPS connection (NMEA input)

Happy Catching

Paul
IN GOD WE TRUST

"Hypocrisy is not a fault these days - it is a lifestyle"

NJBBA: 4567

Ham Call; N2HYG Monitor RPT.  146.835

Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Anyone have MMSI #?
« Reply #32 on: October 10, 2007, 08:12:39 PM »
Reel Time, you will be looking to connect the Yellow NMEA 0183 and it's ground from your COM1 cable on the Lowrance to the yellow wire on the Icom and the shield/ground from Lowrance to the green ( NMEA - ) on the icom.

Then read the manuals to configure settings on Lowrance and input MMSI into Icom, read how to send the calls and you're done :)

Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Anyone have MMSI #?
« Reply #33 on: October 11, 2007, 01:20:02 PM »
Well, posted my new radio for sale in the buy, sell, swap forum.

Found one in black which I prefer over the white, so willing to let it go for a few less then I paid with shipping if anyone is need of an upgrade with a Brand New, feature filled VHF radio.

Offline nickfishbait

  • Member
  • ****
  • Posts: 36
  • Karma: +0/-0
Re: Anyone have MMSI #?
« Reply #34 on: October 11, 2007, 01:32:56 PM »
Can someone take a look at my setup ...
I have a Uniden Solara DSC radio and a Garmin 3205c GPS.
Manuals:
http://www8.garmin.com/manuals/1088_3205_GPS17InstallationInstructions.pdf
http://www.uniden.com/pdf/SOLARA%20DSC-BKom.pdf

Seems like the wires out of the radio will not match the GPS.

The radio has GPS Data In (Green) and GPS Ground.
The GPS has NMEA RX and TX along with GPS Ground (common for radio and GPS).

Any ideas how to hook this up?

Thanks!

Nick


Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Anyone have MMSI #?
« Reply #35 on: October 11, 2007, 09:35:50 PM »
They are comptible. I am replacing the solara I have now. The solara will only send DSC. Can not receive GPS coordinates or store MMSI #'s like in a  built in phone book.

GPS tx to Uniden data in (green)
GPS ground to Uniden Ground

Set output for com port on gps and punch in mmsi # in Uniden.

Offline Luna Sea 5

  • Admin
  • Super Hero Member
  • *****
  • Posts: 12104
  • Karma: +0/-0
  • Nick (Luna Sea 5)
    • My Facebook Profile
Re: Anyone have MMSI #?
« Reply #36 on: October 11, 2007, 09:58:51 PM »
They are comptible. I am replacing the solara I have now. The solara will only send DSC. Can not receive GPS coordinates or store MMSI #'s like in a  built in phone book.

GPS tx to Uniden data in (green)
GPS ground to Uniden Ground

Set output for com port on gps and punch in mmsi # in Uniden.
by any chance, did you look up my components, are they compatable.
Fish out of Toms River NJ.
Call Nick for open boat, 973-417-5756, or on Channel 68.

Team Luna Sea 6

Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Anyone have MMSI #?
« Reply #37 on: October 12, 2007, 05:45:13 AM »
They are comptible. I am replacing the solara I have now. The solara will only send DSC. Can not receive GPS coordinates or store MMSI #'s like in a  built in phone book.

GPS tx to Uniden data in (green)
GPS ground to Uniden Ground

Set output for com port on gps and punch in mmsi # in Uniden.
by any chance, did you look up my components, are they compatable.

You didn't get my pm on it?

Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Anyone have MMSI #?
« Reply #38 on: October 12, 2007, 05:46:40 AM »
e: (No subject)
« Sent to: Luna Sea 3 on: October 09, 2007, 10:20:21 PM »
   Reply with quote Reply Remove this message
Wiring goes:

Garmin Black ground to Horizon green NMEA -

Garmin gray to Horizon blue ( I think- The garmin directions suck).

need to read the garmin manual to go into menu to set NMEA output to match Horizon NMEA input.

Fairly straight forward if you have both manuals (easy download).

 

NJSFlogofinal1

BSX

terrafin

Heavy Duty truck Parts On Line

Web Site Design

Bill Chaser Charters

Know Before You Go

Local Weather | Marine Bouy Weather | Inshore Forecast | Offshore Forecast | Interactive Wind Charts | Tide Charts | Sea Surface Temps | Chlorophyll Concentrates | Online Chart Viewer

-

new jersey marine weather forecastterrafin

-