Author Topic: Snafu Rig  (Read 8979 times)

Offline Eng 94

  • Sr. Member
  • ***
  • Posts: 478
  • Karma: +0/-0
  • When the going gets tough the tough get going
Snafu Rig
« on: January 18, 2015, 08:06:52 AM »
There was a recent post on site on tying a snafu rig,I tried to find it but couldn't locate the one I'm referring to.

Anyway I have a question about tying the rig to the main line. The way it was done on site there is 18" of line with a hook at each end with a Drop Loop in the center for the weight (Sinker). Where are you tying on the main? At that loop?
I don't know the key to success,but the key to failure is trying to please everybody


Offline BigAl13

  • Super Hero Member
  • *****
  • Posts: 6026
  • Karma: +0/-0
  • Fish out of Keyport
Re: Snafu Rig
« Reply #1 on: January 18, 2015, 09:58:16 AM »
the way I tie a snafu is simple, connect your leader material to your braid via your knot if choice. Pull 6' of the leader material off and cut it, then double the leader with a double over hand knot at the top. Attach your sinker to the bottom via a loop, about 6" above the sinker take 2 snelled hooks and stick the loop from one through the other  and put the hook through the loop on each one with the leader in the middle. Now just take the sinker and make an overhand not over the snelled hooks and your done. easy to tie on a moving boat with cold wet hands  t^
Its better to sit in a boat and think about God, than to sit in a church and think about fishing.


Offline IrishAyes

  • Fishing At It's Finest
  • Admin
  • Super Hero Member
  • *****
  • Posts: 17408
  • Karma: +0/-0
Re: Snafu Rig
« Reply #2 on: January 18, 2015, 10:26:21 AM »
Joe, the loop in the snafu rig is not for the sinker, that is used to attach the snafu rig to a dropper loop on your leader (loop to loop). The sinker is attached to the end of your leader under the snafu rig.

Captain Joe of the Irish Ayes

May the holes in your net be no larger than the fish in it.  ~Irish Blessing

Offline Reel McCoy

  • AKA usd00017
  • Super Hero Member
  • *****
  • Posts: 2931
  • Karma: +0/-0
Re: Snafu Rig
« Reply #3 on: January 18, 2015, 10:30:40 AM »
 whs
22' Grady-White Reel McCoy II


Offline Hunter 2

  • RFA-NJ Member
  • Super Hero Member
  • *****
  • Posts: 12156
  • Karma: +0/-0
  • 36' Topaz Express "Hallie Loren"
Re: Snafu Rig
« Reply #4 on: January 18, 2015, 10:44:35 AM »
« Last Edit: January 18, 2015, 10:55:34 AM by Hunter 2 »
Eddie "Hunter 2"
36' Topaz "Hallie Loren"    Charter boat sailing from Wagners Marina, Keyport NJ


 Life is short, Fish Hard.

Offline Eng 94

  • Sr. Member
  • ***
  • Posts: 478
  • Karma: +0/-0
  • When the going gets tough the tough get going
Re: Snafu Rig
« Reply #5 on: January 18, 2015, 10:47:32 AM »
Joe, the loop in the snafu rig is not for the sinker, that is used to attach the snafu rig to a dropper loop on your leader (loop to loop). The sinker is attached to the end of your leader under the snafu rig.



Okay; So if I understand you correctly the snafu with the two hooks and center loop is connected to the leader. (Right?).

Then you tie a drop loop with the sinker separately to that rig. (Is That correct?) Wish I new how to make a sketch of what I'm thinking on here.

No disrespect to your explanation BigAl. But I don't know what you are saying ???. I'm lost 5hrug
I don't know the key to success,but the key to failure is trying to please everybody

Offline Eng 94

  • Sr. Member
  • ***
  • Posts: 478
  • Karma: +0/-0
  • When the going gets tough the tough get going
Re: Snafu Rig
« Reply #6 on: January 18, 2015, 10:52:04 AM »
Edie: Looking at the pictures sequence I have everything up to the snafu already made. What I'm not clear on is the connection to the main line and where the sinker comes into play.

Those pictures on that post do not open.
« Last Edit: January 18, 2015, 11:05:59 AM by Eng 94 »
I don't know the key to success,but the key to failure is trying to please everybody


Offline Hunter 2

  • RFA-NJ Member
  • Super Hero Member
  • *****
  • Posts: 12156
  • Karma: +0/-0
  • 36' Topaz Express "Hallie Loren"
Re: Snafu Rig
« Reply #7 on: January 18, 2015, 11:05:45 AM »
Ok G J,  check these out.. t^

1 hook used just for illustration.. Snafu would attach same way
Sinker loop would be on bottom of main line
« Last Edit: January 18, 2015, 11:06:49 AM by Hunter 2 »
Eddie "Hunter 2"
36' Topaz "Hallie Loren"    Charter boat sailing from Wagners Marina, Keyport NJ


 Life is short, Fish Hard.

Offline Hunter 2

  • RFA-NJ Member
  • Super Hero Member
  • *****
  • Posts: 12156
  • Karma: +0/-0
  • 36' Topaz Express "Hallie Loren"
Re: Snafu Rig
« Reply #8 on: January 18, 2015, 11:11:01 AM »
Garlic Jo's chrz
Eddie "Hunter 2"
36' Topaz "Hallie Loren"    Charter boat sailing from Wagners Marina, Keyport NJ


 Life is short, Fish Hard.


Offline Eng 94

  • Sr. Member
  • ***
  • Posts: 478
  • Karma: +0/-0
  • When the going gets tough the tough get going
Re: Snafu Rig
« Reply #9 on: January 18, 2015, 11:18:58 AM »
Gotcha; Man what a dope fcp
I don't know the key to success,but the key to failure is trying to please everybody

 

NJSFlogofinal1

BSX

terrafin

Heavy Duty truck Parts On Line

Web Site Design

JSBSE_430x80.png

Know Before You Go

Local Weather | Marine Bouy Weather | Inshore Forecast | Offshore Forecast | Interactive Wind Charts | Tide Charts | Sea Surface Temps | Chlorophyll Concentrates | Online Chart Viewer

-

new jersey marine weather forecastterrafin

-