Author Topic: Plastic Thru-Hulls  (Read 1821 times)

Offline Maritime Matt

  • Sponsor
  • Hero Member
  • *****
  • Posts: 688
  • Karma: +0/-0
  • Maritime Skiff 20' Pioneer Pilothouse USCG Lic
    • TASKMARINE.COM
Plastic Thru-Hulls
« on: December 01, 2011, 06:16:29 PM »
These plastic thru-hulls will SINK your boat. One of our good NJSWF member's dropped off his boat and I spotted this real quick. Those cracks you see that are near the red arrow are serious concerns. The ultra-violet rays and age degrade these in no time. One slight grasp on the hose that is connected to these and they can literally fall apart in pieces leaving a nice huge hole in the side. Not good if below the waterline.
Capt.Matt

  WWW.TASKMARINE.COM     Marine SERVICE, Parts & More


Offline Pops Soul

  • SKIP <*}}}><
  • Super Hero Member
  • *****
  • Posts: 5384
  • Karma: +0/-0
  • SKIP <*}}}><
Re: Plastic Thru-Hulls
« Reply #1 on: December 01, 2011, 06:57:54 PM »
I caught that on my boat only on the deck side. Matt can the plastic thru hull fitting be replaced with stainless and/or brass? ???
It's Not A Knot Until You Pull It Tight!


Offline Maritime Matt

  • Sponsor
  • Hero Member
  • *****
  • Posts: 688
  • Karma: +0/-0
  • Maritime Skiff 20' Pioneer Pilothouse USCG Lic
    • TASKMARINE.COM
Re: Plastic Thru-Hulls
« Reply #2 on: December 01, 2011, 07:21:49 PM »
I caught that on my boat only on the deck side. Matt can the plastic thru hull fitting be replaced with stainless and/or brass? ???
[/quote
Yes. Perko and Attwood make them. Perko has plain bronze and chrome plated bronze. Attwood  has stainless.
  Whitecap makes a ss/plastic thru hull. Stainless flange on the outside and plastic inside. Rather interesting.
There is also thru-hulls made of a material called Marelon. Per ABYC Standards, Bronze and Marelon are the only recommended materials for below the waterline.
« Last Edit: December 01, 2011, 07:42:33 PM by Maritime Matt »

  WWW.TASKMARINE.COM     Marine SERVICE, Parts & More

Offline Reckless

  • AKA Frankeu
  • Super Hero Member
  • *****
  • Posts: 2734
  • Karma: +0/-0
Re: Plastic Thru-Hulls
« Reply #3 on: December 01, 2011, 08:08:26 PM »
Can't beat a trained eye. Good catch Matt!


Offline Luna Sea 5

  • Admin
  • Super Hero Member
  • *****
  • Posts: 12102
  • Karma: +0/-0
  • Nick (Luna Sea 5)
    • My Facebook Profile
Re: Plastic Thru-Hulls
« Reply #4 on: December 01, 2011, 08:11:51 PM »
thats the best part of Task Marine.  You can bring your boat in for a simple winterization, but Task Marine looks over your entire boat for potential problems.   chrz  good find..   
Fish out of Toms River NJ.
Call Nick for open boat, 973-417-5756, or on Channel 68.

Team Luna Sea 6

Offline Hunter 2

  • RFA-NJ Member
  • Super Hero Member
  • *****
  • Posts: 12155
  • Karma: +0/-0
  • 36' Topaz Express "Hallie Loren"
Re: Plastic Thru-Hulls
« Reply #5 on: December 02, 2011, 07:53:35 AM »
Good info  TT^
Eddie "Hunter 2"
36' Topaz "Hallie Loren"    Charter boat sailing from Wagners Marina, Keyport NJ


 Life is short, Fish Hard.

Offline Pops Soul

  • SKIP <*}}}><
  • Super Hero Member
  • *****
  • Posts: 5384
  • Karma: +0/-0
  • SKIP <*}}}><
Re: Plastic Thru-Hulls
« Reply #6 on: December 02, 2011, 03:55:23 PM »
Thanks for the info Matt t^
It's Not A Knot Until You Pull It Tight!


 

NJSFlogofinal1

BSX

terrafin

Heavy Duty truck Parts On Line

Web Site Design

JSBSE_430x80.png

Know Before You Go

Local Weather | Marine Bouy Weather | Inshore Forecast | Offshore Forecast | Interactive Wind Charts | Tide Charts | Sea Surface Temps | Chlorophyll Concentrates | Online Chart Viewer

-

new jersey marine weather forecastterrafin

-