Author Topic: How To: Homemade Stinger (Assist) Hooks  (Read 75335 times)

Offline ped579

  • NJSF Field Reporter
  • Super Hero Member
  • *****
  • Posts: 11408
  • Karma: +1/-0
  • Happiness is long casts, tight lines & bent rods
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #20 on: September 07, 2009, 11:37:15 PM »
I just got this on Facebook about 16 min ago...
IN GOD WE TRUST

"Hypocrisy is not a fault these days - it is a lifestyle"

NJBBA: 4567

Ham Call; N2HYG Monitor RPT.  146.835


Offline Bucktail

  • Just a Jig-alo
  • Admin
  • Super Hero Member
  • *****
  • Posts: 12628
  • Karma: +0/-0
  • Have jigs. Will travel.
    • NJ Saltwater Fishing Tackle
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #21 on: September 08, 2009, 12:21:28 AM »
I bought a package of shrink tubing to protect the knots.  I'm not sure if it's really necessary.  But, I noticed that the ends were fraying on the assist hook I used on my bucktail last time out.  Might help them to last a bit longer.  t^


Offline Hotrod

  • Administrator
  • Super Hero Member
  • *****
  • Posts: 20999
  • Karma: +0/-0
  • The Phyllis Ann
    • NJ Outdoords Media
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #22 on: September 08, 2009, 12:29:43 AM »
This is good stuff Bob.. well done t^



Offline Pfishingruven

  • P-Man
  • Moderator
  • Super Hero Member
  • *****
  • Posts: 10298
  • Karma: +0/-0
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #23 on: September 08, 2009, 09:37:39 AM »
That's a good trick...

 TT^


Offline IrishAyes

  • Fishing At It's Finest
  • Admin
  • Super Hero Member
  • *****
  • Posts: 17408
  • Karma: +0/-0
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #24 on: September 08, 2009, 05:46:15 PM »
You can get shrink tubing from Harbour Freight real C-H-E-A-P.  t^
Captain Joe of the Irish Ayes

May the holes in your net be no larger than the fish in it.  ~Irish Blessing

Offline Bucktail

  • Just a Jig-alo
  • Admin
  • Super Hero Member
  • *****
  • Posts: 12628
  • Karma: +0/-0
  • Have jigs. Will travel.
    • NJ Saltwater Fishing Tackle
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #25 on: September 08, 2009, 07:19:28 PM »
You can get shrink tubing from Harbour Freight real C-H-E-A-P.  t^

Thanks Joe.  $2.99 for 94" is a great price, considering I paid more than that for only 28".

Funny, I never heard of this place before.  And they have a store right in Brick. t^

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=98075


Offline Pfishingruven

  • P-Man
  • Moderator
  • Super Hero Member
  • *****
  • Posts: 10298
  • Karma: +0/-0
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #26 on: September 09, 2009, 12:41:55 AM »
Harbor Freight is great!!

 TT^


Offline SurfJockey

  • Super Hero Member
  • *****
  • Posts: 3913
  • Karma: +0/-0
    • Facebook
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #27 on: September 09, 2009, 01:59:06 AM »
They always have 20% off coupons floating around in some magazines.  Added savings on cheap tools and stuff is always a good thing!  TT^
IBSP #1-4150 NJBBA #4753 - Red 2007 Ford Explorer Sport-Trac

Offline IrishAyes

  • Fishing At It's Finest
  • Admin
  • Super Hero Member
  • *****
  • Posts: 17408
  • Karma: +0/-0
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #28 on: September 09, 2009, 07:30:27 AM »
You can subscribe to get their email offers. Usually one or two emails a week with 20% off or list of items on sale. They honor the coupons on line or at the store.  t^
Captain Joe of the Irish Ayes

May the holes in your net be no larger than the fish in it.  ~Irish Blessing


Offline Capt. Chris Gatley

  • Sponsor
  • Member
  • *****
  • Posts: 58
  • Karma: +0/-0
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #29 on: September 09, 2009, 02:35:39 PM »
good deal.  owner gorilla hooks in 5/070 work well for tuna.  also look for the owner power chord. it is green and has wire through it.  helps when bluefish get real pesky.

Offline pilot2550

  • Super Hero Member
  • *****
  • Posts: 1924
  • Karma: +0/-0
  • Z'Obsession
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #30 on: September 23, 2009, 07:32:42 PM »
UPDATE

For those interested in trying this, I just found another place that sells Kevlar at a much cheaper price!

What I bought cost me ~$16.00 (including shipping) for 5 meters (which is around 16').  Average cost = $1.00/ft

This place has it for ~$20.00 (including shipping) for 100'!
Average cost = $.20/ft t^   

Or, if you figure the average size assist hook requires about 6" of Kevlar, it works out to only $.10 a piece (plus the cost of the hook).

Here's the link http://bigronstackle.com/catalog/index.php?cPath=215



Bob,

Just got my delivery of Kevlar from Ron's tackle.  I'll tuck it away for some winter tying.  Thanks for the link and great post.   t^ 

Offline IrishAyes

  • Fishing At It's Finest
  • Admin
  • Super Hero Member
  • *****
  • Posts: 17408
  • Karma: +0/-0
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #31 on: September 23, 2009, 08:29:53 PM »
Still waiting for my order. Ordered on Sept 1st and again on the 20th when I checked and the site said that I had no orders pending.  5hrug

Called Ron today. He told me he did not get my original order (funny, I got an order confirmation email with an order number). Nothing was charged to my bank acct.

He did say he got the order from the 20th and should be shipped by the weekend. Keeping my fingers crossed but it is good to know that someone got their order.
Captain Joe of the Irish Ayes

May the holes in your net be no larger than the fish in it.  ~Irish Blessing

Offline Bucktail

  • Just a Jig-alo
  • Admin
  • Super Hero Member
  • *****
  • Posts: 12628
  • Karma: +0/-0
  • Have jigs. Will travel.
    • NJ Saltwater Fishing Tackle
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #32 on: September 23, 2009, 10:09:20 PM »
That sounds about right Joe.  I ordered some from Ron before I put that post up.  I got a phone message a couple days later in which he said he couldn't read my order. nts

Offline Reckless

  • AKA Frankeu
  • Super Hero Member
  • *****
  • Posts: 2734
  • Karma: +0/-0
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #33 on: September 24, 2009, 05:33:52 PM »
You can get shrink tubing from Harbour Freight real C-H-E-A-P.  t^

Thanks Joe.  $2.99 for 94" is a great price, considering I paid more than that for only 28".

Funny, I never heard of this place before.  And they have a store right in Brick. t^

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=98075



Been there a few times.  grtn

Offline pilot2550

  • Super Hero Member
  • *****
  • Posts: 1924
  • Karma: +0/-0
  • Z'Obsession
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #34 on: September 24, 2009, 08:22:13 PM »
Still waiting for my order. Ordered on Sept 1st and again on the 20th when I checked and the site said that I had no orders pending.  5hrug


Joe, I was beginning to wonder myself. I was just getting ready to contact them and I had a present on my home desk.  Go figure.  Good luck.


Offline joesfishinproblem

  • Full Member of the Den
  • ***
  • Posts: 9
  • Karma: +0/-0
  • fish on
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #35 on: September 24, 2009, 11:13:53 PM »
nice bucktail great idea

Offline Bucktail

  • Just a Jig-alo
  • Admin
  • Super Hero Member
  • *****
  • Posts: 12628
  • Karma: +0/-0
  • Have jigs. Will travel.
    • NJ Saltwater Fishing Tackle
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #36 on: October 10, 2009, 06:04:12 PM »
FYI.  Just received an email that Angler's Pro Shop is out of business. :P

Offline Bucktail

  • Just a Jig-alo
  • Admin
  • Super Hero Member
  • *****
  • Posts: 12628
  • Karma: +0/-0
  • Have jigs. Will travel.
    • NJ Saltwater Fishing Tackle
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #37 on: October 13, 2009, 08:25:52 PM »
Umm...  Just got another email today saying they will reopen December 1st. t^

Offline IrishAyes

  • Fishing At It's Finest
  • Admin
  • Super Hero Member
  • *****
  • Posts: 17408
  • Karma: +0/-0
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #38 on: October 13, 2009, 08:45:46 PM »
Just got my line today from Ron's Tackle. Only took a couple of weeks, but at least I got it.

Bob, what hooks do you use for the stingers? I have Gamakastsu Octopus and the eye is wayyyyyy to small for the kevlar line to pass thru. I got the 300# line.  5hrug
Captain Joe of the Irish Ayes

May the holes in your net be no larger than the fish in it.  ~Irish Blessing

Offline Bucktail

  • Just a Jig-alo
  • Admin
  • Super Hero Member
  • *****
  • Posts: 12628
  • Karma: +0/-0
  • Have jigs. Will travel.
    • NJ Saltwater Fishing Tackle
Re: How To: Homemade Stinger (Assist) Hooks
« Reply #39 on: October 13, 2009, 10:04:21 PM »
The octopusses (octopi?) ;D are not the best for the assists.  I would go with almost any brand "live bait" hook that you like.  I used the Gamakatsu hooks and the 5/0 just barely allows for the double strands of Kevlar to fit through the eye.   t^



 

NJSFlogofinal1

BSX

terrafin

Heavy Duty truck Parts On Line

Web Site Design

rfasig.png

Know Before You Go

Local Weather | Marine Bouy Weather | Inshore Forecast | Offshore Forecast | Interactive Wind Charts | Tide Charts | Sea Surface Temps | Chlorophyll Concentrates | Online Chart Viewer

-

new jersey marine weather forecastterrafin

-