any snow plow guys out there????

[rdent5]

if so i have a fisher snow plow and i broke off the metal strip right above the cutting edge looks like there are holes on the plow itself where it bolted to im not sure???

[Still Running]

I think on a Fisher plow, thats the trip. I am pretty sure the board does not trip.

[DJ76]

nothing a good welder can't fix for relatively cheap.  I have a ten year old western and knock on wood still going strong.  Occasionaly something breaks and I run it over to the welder to fix up.

[rdent5]

sounds good thats what i thought thanks

[Luna Sea 5]

I have a Boss.. and all I do is unbolt and replace the metal edge when it gets worn. 

[rdent5]

no not the cutting edge its a small strip above the cutting edge

[DJ76]

no not the cutting edge its a small strip above the cutting edge

did you break one of the support ribs?  Not to familuar with fisher, I own/ed westerns.  I've had my welder fix everthing from the jack stand on the ultra mount, the plow shoes and my cutting edge.  Caught the cutting edge in a curb joint...wound up breaking the cutting edge off about ten inches.  Instead of buying a new one (~$125) I paid the welder like 20 bucks to weld the piece back on.   for any plow questions try plowsite.com  Not a bad site for info and help with repairs.

[rdent5]

cool thanks for the info