Author Topic: Braided Line For Fluke  (Read 19741 times)

Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Braided Line For Fluke
« Reply #20 on: January 19, 2008, 01:55:06 PM »
if you like braid for fluke, shouldn't you like to for everything else.  I use braid all the time.  I switched to mine on one of my old reels, and it completely sucks.  Braid is good for FEEL... so all bottom fish are work braid, fluke, sea bass, striper's, tog, etc.. The only time I don't feel a need for it is if I am either trolling or bluefishing.  You don't need the feel while bluefishing but with most other species you want to have that sensitive touch.
Perfect for trolling to get your baits down.

Easily get 5' + deeper with braid then with equivalent mono.


Offline Luna Sea 5

  • Admin
  • Super Hero Member
  • *****
  • Posts: 12104
  • Karma: +0/-0
  • Nick (Luna Sea 5)
    • My Facebook Profile
Re: Braided Line For Fluke
« Reply #21 on: January 19, 2008, 03:37:15 PM »
I knew that Mike.. I use braid for trolling also...  I was just saying that if there is anything I can get away not using it for would be to troll... See ya at the party pal.
Fish out of Toms River NJ.
Call Nick for open boat, 973-417-5756, or on Channel 68.

Team Luna Sea 6


Offline bassnblues

  • Super Hero Member
  • *****
  • Posts: 1492
  • Karma: +0/-0
Re: Braided Line For Fluke
« Reply #22 on: January 19, 2008, 04:26:40 PM »
if you like braid for fluke, shouldn't you like to for everything else.  \

I find it's not really necessary for clamming/chunking stripers and I don't troll too much. I also don't like it for casting jigs and lures because it has a tendency for wind knots. I wouldn't bring it on a party boat because I don't want to be hassled about it.

Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Braided Line For Fluke
« Reply #23 on: January 19, 2008, 04:28:09 PM »
if you like braid for fluke, shouldn't you like to for everything else.  \

I find it's not really necessary for clamming/chunking stripers and I don't troll too much.

Def allows you to have to use less weight to get the chunks or clams down when chunking.


Offline Luna Sea 5

  • Admin
  • Super Hero Member
  • *****
  • Posts: 12104
  • Karma: +0/-0
  • Nick (Luna Sea 5)
    • My Facebook Profile
Re: Braided Line For Fluke
« Reply #24 on: January 19, 2008, 07:35:20 PM »
at this point, I will never use mono again.. not even for snapper blues.. Im don't with it..
Fish out of Toms River NJ.
Call Nick for open boat, 973-417-5756, or on Channel 68.

Team Luna Sea 6

Offline ped579

  • NJSF Field Reporter
  • Super Hero Member
  • *****
  • Posts: 11408
  • Karma: +1/-0
  • Happiness is long casts, tight lines & bent rods
Re: Braided Line For Fluke
« Reply #25 on: January 19, 2008, 09:22:38 PM »
Hi All,

I have braid on all my spinning surf reels and there are 6 of them.  I haven't had a problem with wind knots at all.  A lot of time the wind knots are caused by not using snap swivels from your braided line to the leader and twist causes the knots.  Plus I found that over filling of ones spool will cause the knots and one other thing that I suggest all anglers just starting out in the surf to do is after you cast trip the bail over manually.

By tripping manually you will not put a twist in the line as the bail flips over.

Happy Catching

Paul
IN GOD WE TRUST

"Hypocrisy is not a fault these days - it is a lifestyle"

NJBBA: 4567

Ham Call; N2HYG Monitor RPT.  146.835

Offline wb

  • Super Hero Member
  • *****
  • Posts: 5274
  • Karma: +0/-0
Re: Braided Line For Fluke
« Reply #26 on: January 19, 2008, 09:27:04 PM »
Based on the high praise I read here I have spooled up my fluke spinners with Sufix braid. I got a good deal on it and can't wait to try. My conventionals haven't made the switch yet but sumthin tells me I will soon...


Offline ped579

  • NJSF Field Reporter
  • Super Hero Member
  • *****
  • Posts: 11408
  • Karma: +1/-0
  • Happiness is long casts, tight lines & bent rods
Re: Braided Line For Fluke
« Reply #27 on: January 19, 2008, 09:41:09 PM »
I just got a new Penn 525M as a belated B-day gffe that I will be loading up with braid, now I have to go and but a new rod for that puppy.

Paul
IN GOD WE TRUST

"Hypocrisy is not a fault these days - it is a lifestyle"

NJBBA: 4567

Ham Call; N2HYG Monitor RPT.  146.835

Offline Luna Sea 5

  • Admin
  • Super Hero Member
  • *****
  • Posts: 12104
  • Karma: +0/-0
  • Nick (Luna Sea 5)
    • My Facebook Profile
Re: Braided Line For Fluke
« Reply #28 on: January 19, 2008, 09:46:04 PM »
once you use the braid, you will never go back to mono.. im surprised mono is still in business
Fish out of Toms River NJ.
Call Nick for open boat, 973-417-5756, or on Channel 68.

Team Luna Sea 6


Offline gottog

  • Super Hero Member
  • *****
  • Posts: 1000
  • Karma: +0/-0
Re: Braided Line For Fluke
« Reply #29 on: January 21, 2008, 12:37:19 PM »
14' leader too long on a 7' rod w/ conventional reel on a private boat?  Only if you use a swivel for the connection ;)

What good is 14' of mono if fishing in 10-15' of water?

No reason to use more then 5-7' on a PrivateBoat.

Party boat? Maybe, so that mates don't complain.

Why would you?
Why not?  All you need is just a small section of braid off from the reel to have improved sensitivity. 
On a privated boat I much rather have enough of a mono leader on so that I can grab it instead of braid especially if you end up with a dogfish or skate or whatever that you don't wish to lift with your rod or put in to the net.  I rather have that leader wrapped around on the spool a few times to lift anything. That's me though.

Of course with spinning gear you can get away with alot less length of mono leader.  I'd still would want enough on to be able to grab on to though.

Also if you use a fishfinder slide for the sinker, I much rather have it sliding on mono than braid, even with using the heavy-duty slides.

Mono still has it's place and time that it shines.

XL Rods addict
Fishing hack

Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Braided Line For Fluke
« Reply #30 on: January 21, 2008, 01:03:26 PM »
5-7' of mono is MORE then enough mono to grab on a private boat.

14' of mono in 10-15' of water defeats the purpose of braid in both feel (however minor) and negates the "lower weight to hold bottom" effect.

For me, when fluking or bottom fishing, 7' of braid is plenty to be safe while maintaining all of the benefits of braid :)

Offline bassnblues

  • Super Hero Member
  • *****
  • Posts: 1492
  • Karma: +0/-0
Re: Braided Line For Fluke
« Reply #31 on: January 21, 2008, 01:24:25 PM »
I don't use it any different than regular line with a normal fuke rig attached...Am I doing something wrong.

Offline IrishAyes

  • Fishing At It's Finest
  • Admin
  • Super Hero Member
  • *****
  • Posts: 17408
  • Karma: +0/-0
Re: Braided Line For Fluke
« Reply #32 on: January 21, 2008, 01:27:37 PM »
Nope, to each his own. 

I put a fishfinder rig on the braid, any where from an eighteen inch to four foot leader, depending on conditions and rig, and drift away.

Gives me plenty of leader to reach out to and pull in whatever doesn't go in the net.
Captain Joe of the Irish Ayes

May the holes in your net be no larger than the fish in it.  ~Irish Blessing

Offline gottog

  • Super Hero Member
  • *****
  • Posts: 1000
  • Karma: +0/-0
Re: Braided Line For Fluke
« Reply #33 on: January 21, 2008, 02:25:37 PM »
Sometimes using the bare minimum of lead to hold bottom is NOT a good thing. nosmly

For flounder, with a 10-15# mono leader, if fishing just that, trust me, it ain't an issue. ;)

Just remember, it's always better to have and not need, than need and not have. chrz

XL Rods addict
Fishing hack

Offline Luna Sea 5

  • Admin
  • Super Hero Member
  • *****
  • Posts: 12104
  • Karma: +0/-0
  • Nick (Luna Sea 5)
    • My Facebook Profile
Re: Braided Line For Fluke
« Reply #34 on: January 21, 2008, 02:39:11 PM »
Just remember, it's always better to have and not need, than need and not have. chrz

That is a great way to look at it.. I live by that as well.
Fish out of Toms River NJ.
Call Nick for open boat, 973-417-5756, or on Channel 68.

Team Luna Sea 6


Offline PeggyLee

  • Super Hero Member
  • *****
  • Posts: 3970
  • Karma: +0/-0
Re: Braided Line For Fluke
« Reply #35 on: January 22, 2008, 10:09:08 PM »
QUESTION ON BRAID . When you use braid do you like a specific color. They come in smoke,flame green, crystal,etc. Or does it make a difference ? Whats your feedback.

Offline ped579

  • NJSF Field Reporter
  • Super Hero Member
  • *****
  • Posts: 11408
  • Karma: +1/-0
  • Happiness is long casts, tight lines & bent rods
Re: Braided Line For Fluke
« Reply #36 on: January 22, 2008, 11:39:27 PM »
For braid I like the green.  The thing is once it gets down to any depth it all turns to shades of gray anyway.

I use braid to a swivel attached to a fish finder rig I make out of fluorocarbon.  Works great off the surf.

Happy Catching

Paul
IN GOD WE TRUST

"Hypocrisy is not a fault these days - it is a lifestyle"

NJBBA: 4567

Ham Call; N2HYG Monitor RPT.  146.835

Offline gottog

  • Super Hero Member
  • *****
  • Posts: 1000
  • Karma: +0/-0
Re: Braided Line For Fluke
« Reply #37 on: January 23, 2008, 01:37:58 PM »
I use hi-vis colors, green, smoke, etc.  With a long mono leader(fluro I find for where and how I fish to not be an advantage) the color of the braid makes no difference.

Heck, T uses pink and outfishes many a supposed sharpie at times t^

I guess if you tie direct then color may be a factor.

Some say the new Fireline Crystal is the cat's meow.  Personally have not tried it yet.  DId find that the hi-vis green of Fireline seemed weaker than the same #test in smoke color.  Pink seems fine. 5hrug

XL Rods addict
Fishing hack

Offline PeggyLee

  • Super Hero Member
  • *****
  • Posts: 3970
  • Karma: +0/-0
Re: Braided Line For Fluke
« Reply #38 on: January 23, 2008, 02:53:34 PM »
Guys, Thanks for the feedback,looking forward to using some this year attached to a shocker.AJ

Offline Luna Sea 5

  • Admin
  • Super Hero Member
  • *****
  • Posts: 12104
  • Karma: +0/-0
  • Nick (Luna Sea 5)
    • My Facebook Profile
Re: Braided Line For Fluke
« Reply #39 on: January 23, 2008, 03:20:17 PM »
more to follow.. this season didn't even begin yet.
Fish out of Toms River NJ.
Call Nick for open boat, 973-417-5756, or on Channel 68.

Team Luna Sea 6


 

NJSFlogofinal1

BSX

terrafin

Heavy Duty truck Parts On Line

Web Site Design

rfasig.png

Know Before You Go

Local Weather | Marine Bouy Weather | Inshore Forecast | Offshore Forecast | Interactive Wind Charts | Tide Charts | Sea Surface Temps | Chlorophyll Concentrates | Online Chart Viewer

-

new jersey marine weather forecastterrafin

-