New LED Trailer Lights

[Hunter 2]

I replaced my trailer lights today with LED's,, They are not self grounding so I had to crimp on a ring terminal to the white wire and ground it to the mounting screw. I also had to reem out the hole for the marker lights alittle bit so the socket will seat properly. I sprayed the drilled hole with some galvanized zinc spray to seal it before mounting the new light. I used the existing wires because my trailers only 5 years old and they were in good shape. I also used heat shrink to cover all the butt splices and ring terminal connections. They look nice and no more rusty sockets to deal with. I stretched it to  a 3 beer job.

[BigAl13]

nice 3 beers so about 9 minutes

[Pops Soul]

I sprayed the drilled hole with some galvanized zinc spray to seal it before mounting the new light.  I stretched it to  a 3 beer job.

Good Idea Eddie useing the Galvanized Spray after drilling

[Scott G.]

   COME ON ED, THREE BEERS.... WHAT HAPPENED DID YOU RUN OUT OF BEER      OFF TO KAT SHACK 

[Hunter 2]

 

[Still Running]

3? wow a slow day

[IKAT]

  COME ON ED, THREE BEERS.... WHAT HAPPENED DID YOU RUN OUT OF BEER      OFF TO KAT SHACK 

   guess he diidn't count the UNION breaks and lunch hour     

[Scott G.]

 

[Hunter 2]

I'm getting my body in prime shape for fishing,,    I mean St.Paddys day

[Andys Delight]

It's funny, I had LED's on my old trailer and most of the LED's on both sides blew out over time after multiple dunks.  Now on my current trailer I have the old bulbs, have forgotten countless times to unplug before dunking, and they still shine bright.   

[IKAT]

I'm getting my body in prime shape for fishing,,    I mean St.Paddys day

Here's to you Eddie

[Scott G.]