Author Topic: Funky Munky Almost ready.  (Read 10370 times)

Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Funky Munky Almost ready.
« on: April 21, 2008, 11:46:01 AM »
Well, did a tremendous amount of work Friday, Saturday and Sunday to get the boat ready.

1st, MANY, MANY, MANY thanks go out to those who broke their butt helping me out.

Young Gull is a machine who spent all of Friday and Saturday working on the boat.

-New bait well pump install
-Ran some new fuel line and installed fuel flo sensor
-mounted 2 new gauges in dash (water pressure and engine trim)
-moved over oil tank and installed 2nd battery tray
-drill 2 5" holes in gunwale and mounted my new speakers, then fished speaker wire thru.
-Mounted my new VHF and installed new antenna.

Special appearance by Sam3 to check on his boat

Saturday, with the addition of my buddy Kim and our very own WB, we:

-installed Bennett M120 Sport tab trim tabs
-wired up the backlighting to some of the new gauges
-installed a Lowrance LMF-400 NMEA network and gauge and powered to switch.
-straightened up some wiring in the helm.

We had some special guest appearances by our very own Duffman and Treebard Mark (and his buddy Johnny).

Sunday, back at it again.

Duffman came down and wired up the 2 rear speakers and straightened out the other 2 speaker wiring. Did some more cleaning up of the helm wiring and finished up VHF Install.
-Kim came down and help fix up my rub rail as well as remount the swim platform that gave us a bit of trouble on Saturday as we had to remove for the trim tab install.
-My buddy Paul came by to compound and wax the hull using some new stuff I bought (will review later).
The hull looks AMAZING now compared to what it was (and what it was last year)- superb job and the stuff he used was GREAT.
-Sam3 also down working on his boat as well.

Have some other minor stuff to finish up.
Should be painting bottom on Wed or Thursday (marina) and should be ready to go Friday or Saturday the latest).

Going to head back down Friday to try and finish up everything.
Try to head out Saturday to fish if possible.
Sunday Paul comes back to detail the  topsides.

Words can not express my appreciation for the help/work provided by Young Gull, Kim, WB and Duffman.
Not only would I not have the time to complete any of these tasks, I don't even have the skills these guys do in this area.

Thanks to each and every one of you for helping me get the boat ready.

Means a lot to have special friendships with those that offer their help while expecting nothing in return (OK, a few fishing trips :)

Means a lot to me that the boat should be ready in time for the water.

Means even more that I have friends who were willing to help (and carry most of the workload)without thinking twice about it.

Thanks again guys, I REALLY appreciate it!!!!

Will take some pics next week when she is ready :)


Offline hareball

  • Super Hero Member
  • *****
  • Posts: 1368
  • Karma: +0/-0
    • waterwolves
Re: Funky Munky Almost ready.
« Reply #1 on: April 21, 2008, 11:50:43 AM »
Wow that was a heap of work you guys did!! nice job and can't wait for the pics. t^
There is water at the bottom of the ocean- David Byrne


Offline shadyvito

  • Full Member
  • **
  • Posts: 222
  • Karma: +0/-0
Re: Funky Munky Almost ready.
« Reply #2 on: April 21, 2008, 11:59:39 AM »
Holy crap! You did everything but whittle the hull out of a tree! Can't wait to see the pics, before and after.
PS - That's what that part of the alphabet would look like if there where no Q or R.

Offline Luna Sea 5

  • Admin
  • Super Hero Member
  • *****
  • Posts: 12104
  • Karma: +0/-0
  • Nick (Luna Sea 5)
    • My Facebook Profile
Re: Funky Munky Almost ready.
« Reply #3 on: April 21, 2008, 12:00:46 PM »
way to go Mike.. Oh, by the way, how was it installing those tabs.
Fish out of Toms River NJ.
Call Nick for open boat, 973-417-5756, or on Channel 68.

Team Luna Sea 6


Offline Sam3

  • Hero Member
  • ****
  • Posts: 778
  • Karma: +0/-0
Re: Funky Munky Almost ready.
« Reply #4 on: April 21, 2008, 12:03:59 PM »
That compounding and wax job came out great! Like a brand new boat!!

Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Funky Munky Almost ready.
« Reply #5 on: April 21, 2008, 12:05:05 PM »
No before pics really (just ones from last year)m but will have after pics when she is all finished Soon.

Tabs weren't too bad except the missing template for the switch (WhIch Young gull did by hand-and a fantastic job at that)and the little problem remounting the swim paltform.

Other then that, it went fairly smoothly.

Young GUll can chime in as he and Kim did all the work ;)

Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Funky Munky Almost ready.
« Reply #6 on: April 21, 2008, 12:06:28 PM »
Yeah I couldn't believe how it looked just after using the compound like cleaner he used.

Nautical Ease is the way to go. Stuff is GREAT.

I was pretty depressed seeing how bad the hull look on Friday when I got there.
I can not believe the complete 180 I feel after seeing just 1 coat of polish on it yesterday.


Offline Sam3

  • Hero Member
  • ****
  • Posts: 778
  • Karma: +0/-0
Re: Funky Munky Almost ready.
« Reply #7 on: April 21, 2008, 12:09:03 PM »
If I had more time, I would have done mine too. I can't believe how well that Nautical Ease works.

Offline Pops Soul

  • SKIP <*}}}><
  • Super Hero Member
  • *****
  • Posts: 5384
  • Karma: +0/-0
  • SKIP <*}}}><
Re: Funky Munky Almost ready.
« Reply #8 on: April 21, 2008, 12:12:20 PM »
 w0w You guys Kicked @$$ Way to go Guys, Mikey Rock on Brother  t^
It's Not A Knot Until You Pull It Tight!


Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Funky Munky Almost ready.
« Reply #9 on: April 21, 2008, 12:19:14 PM »
If I had more time, I would have done mine too. I can't believe how well that Nautical Ease works.

Paulie did his father's 40' Formula ealrier in the weekend using Yachtbrite stuff that cost almost 200 for the stuff.

He couldn't believe how well this worked and how easy it was. He is going to start using it himself.
His father came over to check it out and he was blown away as well.

REALLY great stuff.

Offline Bob

  • Full Member
  • **
  • Posts: 153
  • Karma: +0/-0
Re: Funky Munky Almost ready.
« Reply #10 on: April 21, 2008, 12:31:11 PM »
Hey Mike, glad to hear you were able to get as much done, you must be a great supervisor!  Sounds like you will be in the water this weekend.  Good luck and tight lines.

Bob

Offline IrishAyes

  • Fishing At It's Finest
  • Admin
  • Super Hero Member
  • *****
  • Posts: 17408
  • Karma: +0/-0
Re: Funky Munky Almost ready.
« Reply #11 on: April 21, 2008, 12:34:02 PM »
Kudos to all those who pitched in. That was a lot of projects you guys took on.  t^
Captain Joe of the Irish Ayes

May the holes in your net be no larger than the fish in it.  ~Irish Blessing

Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Funky Munky Almost ready.
« Reply #12 on: April 21, 2008, 12:37:12 PM »
I pitched in. Those guys carried the bulk of the load.

Thanks again to all :)

Offline Treebeard

  • Super Hero Member
  • *****
  • Posts: 2040
  • Karma: +0/-0
Re: Funky Munky Almost ready.
« Reply #13 on: April 21, 2008, 12:39:17 PM »
It was great finally getting to meet you guys on Sat... Boat was sure lookin sweet.. There where guys swarmin all over it like a pit crew at a nascar race!

Offline Pops Soul

  • SKIP <*}}}><
  • Super Hero Member
  • *****
  • Posts: 5384
  • Karma: +0/-0
  • SKIP <*}}}><
Re: Funky Munky Almost ready.
« Reply #14 on: April 21, 2008, 01:29:06 PM »
Mike was this the polish used  ???
It's Not A Knot Until You Pull It Tight!


Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Funky Munky Almost ready.
« Reply #15 on: April 21, 2008, 01:46:30 PM »
It was great finally getting to meet you guys on Sat... Boat was sure lookin sweet.. There where guys swarmin all over it like a pit crew at a nascar race!

Pleasure finally meeting you as well.

Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Funky Munky Almost ready.
« Reply #16 on: April 21, 2008, 01:46:59 PM »
Mike was this the polish used  ???

That's the stuff.

Used the fiberglass cleaner prior to the polish.

Didn't even need to use water to wash boat 1st.

Offline Duffman

  • Hero Member
  • ****
  • Posts: 890
  • Karma: +0/-0
Re: Funky Munky Almost ready.
« Reply #17 on: April 21, 2008, 01:49:37 PM »
  Machines is right! Ed and Kim got a ton done!

  She's shaping up nicely Mike, gonna be a nice season ahead.

  Going to stop by the marina tonight to pick up the ladder. I'll leave the stainless mount in the boat for you.

  Got to move that radio like I said. Easier to read and out of the way. Finish up the VHF connector as well. I'll talk to ya and figure out when after you splash down.

  Sam and Mark, good meeting you guys, nice putting faces to the names.

  Heres to a good season fellas   chrz

Offline mboy

  • Sr. Member
  • ***
  • Posts: 361
  • Karma: +0/-0
  • The Funky Munky
Re: Funky Munky Almost ready.
« Reply #18 on: April 21, 2008, 01:51:22 PM »
 chrz

Thanks again Duff.

Offline Fishin Dude

  • Super Hero Member
  • *****
  • Posts: 4526
  • Karma: +0/-0
  • FISH CONTROL MY BRAIN
Re: Funky Munky Almost ready.
« Reply #19 on: April 21, 2008, 08:41:01 PM »
WOW! My head is spinnig just from reading the work description. Enjoy all the upgrades. Great work guys. t^ <'((((><
I've spent most of my life fishing, the rest I've just wasted     <'((((><


 

NJSFlogofinal1

BSX

terrafin

Heavy Duty truck Parts On Line

Web Site Design

Bill Chaser Charters

Know Before You Go

Local Weather | Marine Bouy Weather | Inshore Forecast | Offshore Forecast | Interactive Wind Charts | Tide Charts | Sea Surface Temps | Chlorophyll Concentrates | Online Chart Viewer

-

new jersey marine weather forecastterrafin

-